rewa
Member

3376 Likes

Page 39 of 226 First ... 252627282930313233343536373839404142434445464748495051525389139 ... Last

• Jump to page:

1. 
   rewa liked post by MSL On thread : Gun Porn, show off your new toys

   Serial number. But also, the internal parts are machined rather than stamped sheet or cast. And the sights are a bit more refined. Sent from my iPhone using Tapatalk

   Liked On: 15-12-2022, 11:20 AM

2. 
   rewa liked post by MSL On thread : Gun Porn, show off your new toys

   https://uploads.tapatalk-cdn.com/20221209/bc1f03be653d2ae3cec696c2b751a1b3.jpg Pre 64 win 94 30-30. All original, with all its bits and an immaculate bore. I foolishly sold one in 2020 to a...

   Liked On: 15-12-2022, 11:19 AM

3. 
   rewa liked post by Synthetic On thread : Gun Porn, show off your new toys

   Mauser M12 in 308 topped with a 3-9x40 Zeiss Conquest MC with A4 reticle. Not going to suppressor this one. Will be the general purpose rifle that does everything. 211917

   Liked On: 15-12-2022, 11:18 AM

4. 
   rewa liked post by Trout On thread : Venison shoulder roast

   Deer i shot a few days,i decided to take the sholders and make into roasts.Cut the hock off and about 3 inchs of the blade to fit on oven tray for size.Into the freezer for the next month or 2.No...

   Liked On: 15-12-2022, 11:12 AM

5. 
   rewa liked post by MarkN On thread : Venison shoulder roast

   Yeppidy oven bag and garlic, maybe, little stock and wrap in fat bacon too. :)

   Liked On: 15-12-2022, 11:11 AM

6. 
   rewa liked post by Moa Hunter On thread : Venison shoulder roast

   Try that recipe I posted above for the spike buck and for the older buck cook the shoulder in an oven bag. Make some knife point pockets to slip in some peeled cloves of garlic

   Liked On: 15-12-2022, 11:11 AM

7. 
   rewa liked post by johnd On thread : What are you using for pressure estimation in your handloads.

   one thing i will add here be very carefull with supressors, they give much higher pressure. I have seen loads shot with one on that pops primers out the back of the bolt face, and renders the pockets...

   Liked On: 13-12-2022, 01:34 PM

8. 
   rewa liked post by No.3 On thread : What are you using for pressure estimation in your handloads.

   Primers are an interesting one. Soft primer cups can show marking, backing out and flattening that actually shows a too-light load rather than too-hot. Also, if the firing pin hole in the bolt face...

   Liked On: 13-12-2022, 01:32 PM

9. 
   rewa liked post by dannyb On thread : What are you using for pressure estimation in your handloads.

   I find velocity a pretty good indicator, but usually I will look at a culmination of things and then the velocity kinda just confirms it. primer flattening, ejector stamp and or swipe, heavy bolt,...

   Liked On: 13-12-2022, 01:27 PM

10. 
    rewa liked post by Micky Duck On thread : What are you using for pressure estimation in your handloads.

    I do what the manuals TOLD ME TO DO when starting out.....watch primers and primer pockets,use feeler guage for brass deteriation. if a load feels hot,it probably is hot. ejector swipe, heck Ive seen...

    Liked On: 13-12-2022, 01:26 PM

11. 
    rewa liked post by HILLBILLYHUNTERS On thread : Resurgence of interest in the old "Three Oh"?

    Hell you don't look that old .

    Liked On: 27-11-2022, 10:33 PM

12. 
    rewa liked post by Jhon On thread : Resurgence of interest in the old "Three Oh"?

    Treat them like a bow, get closer :)

    Liked On: 27-11-2022, 10:28 PM

13. 
    rewa liked post by bumblefoot On thread : Resurgence of interest in the old "Three Oh"?

    Tahr Pretty good I'd say. My 1944 SMLE shoots 3" at 100yds (3 shots) and it only has a 16.5" barrel. I'm not a long range shooter. I do have a Howa 308 and a Howa mini 223; I call my 223 the freezer...

    Liked On: 27-11-2022, 10:27 PM

14. 
    rewa liked post by Tedz50 On thread : Resurgence of interest in the old "Three Oh"?

    I was offered a 30 06 double rifle and would have bought it but it would not keep barrels shooting remotely together,but I bought the two u/o versions they make as regulation can be adjusted. Unless...

    Liked On: 27-11-2022, 10:20 PM

15. 
    rewa liked post by johnd On thread : Resurgence of interest in the old "Three Oh"?

    Are the .303 gaining popularity ? Having a resurgance ? I think yes, partly on the back of Jacinda bucks, and partly due to folk realising there is a lot of charm / history to these. Growing up I...

    Liked On: 27-11-2022, 08:34 PM

Page 39 of 226 First ... 252627282930313233343536373839404142434445464748495051525389139 ... Last

• Jump to page: