rewa
Member

3376 Likes

Page 87 of 226 First ... 37737475767778798081828384858687888990919293949596979899100101137187 ... Last

• Jump to page:

1. 
   rewa liked post by zimmer On thread : Brass FL Sizing Trouble

   Some brands of shell holders will accept 308 sized brass and 6.5x55. A few years ago I upgraded my shellholders and now use a RCBS #2 or a Redding E-Z #7 for the Swede. The Redding E-Z #7 will fit...

   Liked On: 27-12-2020, 02:18 PM

2. 
   rewa liked post by GWH On thread : Brass FL Sizing Trouble

   Are you using the correct shell holder? Ive struck this exact same issue when i first started reloading for a 6.5x55. I had the wrong shell holder, i got the right one and problem solved. ...

   Liked On: 27-12-2020, 02:16 PM

3. 
   rewa liked post by R93 On thread : Brass FL Sizing Trouble

   Are you using the decapping pin? Is there a lot of resistance on the up stroke? Try resizing without it. I use the same dies and while good it took a bit of mucking around to get them to work a...

   Liked On: 27-12-2020, 02:11 PM

4. 
   rewa liked post by outdoorlad On thread : What a mission! 260 Load

   I think the LRAB like a bit of jump from the reading I did, I used the 129 in my 6.5x55 and they killed very well the 142 should be good too. In my 260 I’m using the Sierra 130gn gamechanger with...

   Liked On: 27-12-2020, 02:00 PM

5. 
   rewa liked post by stagstalker On thread : What a mission! 260 Load

   Well I finally got there but I feel aged from the process. Load sorted for the new 19" Tikka 260. As we all know, supply in certain areas for ammunition is very bad so ended up grabbing some 142...

   Liked On: 27-12-2020, 02:00 PM

6. 
   rewa liked post by dannyb On thread : Ultrasonic cleaners

   I used my mates hornady one the other day, it did a good job with the hornandy solution in it. But I tried cleaning some other cases with detergent then a 1 hour soak in 50:50 vinager and water mix...

   Liked On: 27-12-2020, 01:54 PM

7. 
   rewa liked post by Tim Dicko On thread : Load test Sierra 130gn HPBT 6.5x55

   Your numbering system is interesting. you obviously aren't to ocd. Looks like the rifle likes those projectiles a fair bit. 6 does look good. Take em out to distance and look at the vertical spread...

   Liked On: 27-12-2020, 01:50 PM

8. 
   rewa liked post by R93 On thread : WTB reloading sensei

   I learned off others when I started out. Loaded my first rounds 38 yrs ago. Been hooked on the science and process ever since. No YouTube back then[emoji16] I think having someone competent teach...

   Liked On: 27-12-2020, 01:32 PM

9. 
   rewa liked post by stagstalker On thread : WTB reloading sensei

   I'm sure some good bugger will give you hand. Having someone physically take you through everything and demonstrate the how and why etc is definitely the way to kick-start reloading. Then the rest is...

   Liked On: 27-12-2020, 01:31 PM

10. 
    rewa liked post by GWH On thread : Trying something, Eric Cortina method of load development

    Yep seating depth has a huge effect on grouping. As far as im aware its all to do with at which stage of the barrel harmonics that the bullet is exiting the muzzle. From the seating depth testing...

    Liked On: 27-12-2020, 01:16 PM

11. 
    rewa liked post by dannyb On thread : Trying something, Eric Cortina method of load development

    I'm also wondering if seating depth will effect velocity, as the deeper I seat the pills surely pressure and velocity will increase ? Then again maybe it will be negligible who knows ?

    Liked On: 27-12-2020, 01:15 PM

12. 
    rewa liked post by dannyb On thread : Trying something, Eric Cortina method of load development

    So with my model 70 270win I decided to have a crack. Out of curiosity I measured the distance to the lands with a hornady OAL gauge and got an average length of 2.780" which would normally see me...

    Liked On: 27-12-2020, 01:13 PM

13. 
    rewa liked post by dannyb On thread : Trying something, Eric Cortina method of load development

    So I'm trying something different. I have been watching Eric Cortina's vids on YouTube reference "chasing the lands" and how it's a really inaccurate method of working up a load. So for those that...

    Liked On: 27-12-2020, 01:11 PM

14. 
    rewa liked post by xring On thread : Another 9mm bolt action

    thanks guys! Husky1600 - we don't have any answers yet, but we will try to make a first batch in 3 months or so. we really need to try this first and sort out any issue that comes up. because of...

    Liked On: 27-12-2020, 01:07 PM

15. 
    rewa liked post by xring On thread : Another 9mm bolt action

    hey guys, i have posted sometime ago a 9mm project we were working on and i made it become available to the public. we are almost sold out to be honest. this one is, however, based on a Rem 700...

    Liked On: 27-12-2020, 01:05 PM

Page 87 of 226 First ... 37737475767778798081828384858687888990919293949596979899100101137187 ... Last

• Jump to page: