Roarless20
Member

1158 Likes

Page 58 of 78 First ... 84445464748495051525354555657585960616263646566676869707172 ... Last

• Jump to page:

1. 
   Roarless20 liked post by Reindeer On thread : Te Urewera

   Anyone else see these huts made from water tanks. https://www.rnz.co.nz/news/national/474337/turks-a-new-design-for-a-lightweight-back-country-hut Fully insulated, solar and easily flown into any...

   Liked On: 16-10-2022, 10:25 PM

2. 
   Roarless20 liked post by Finnwolf On thread : One up the spout

   With me it’s not so much the ‘nano second’, it’s more the noise. And in the bush the shooting ranges are well within hearing distance of the deer.

   Liked On: 12-10-2022, 05:15 PM

3. 
   Roarless20 liked post by imaca On thread : Kaimanawa Forest Park

   But it gives hunters who want to walk no access. It's a crock of shit and no amount of rolling it in glitter will disguise this. To quote Aldo Leopold "Ethical behavior is doing the right thing...

   Liked On: 11-10-2022, 05:56 PM

4. 
   Roarless20 liked post by Kimber 7mm-08 On thread : A day at the range - Check you scope mount screws!

   I finally finished off a flooring project at home on Saturday, so was earned a well deserved Sunday range session. Been shooting my 7mm-08 a bit more lately at the range, and had some pretty good...

   Liked On: 06-10-2022, 10:38 PM

5. 
   Roarless20 liked post by stagstalker On thread : Wind reading accuracy while hunting

   I’m pretty hesitant these days taking shots on animals in obvious wind. If it’s calm enough then i’ll stretch the legs but if there’s a decent breeze or ‘wind’ then I reel in my expectations. Let...

   Liked On: 05-10-2022, 10:04 PM

6. 
   Roarless20 liked post by Noswal On thread : Wind reading accuracy while hunting

   https://www.youtube.com/watch?v=gh6pXPb-7Jg This Vid was sent to me by a mate. Pretty useful in an easy to understand explanation. I've always found the uplift more challenging to allow for than...

   Liked On: 05-10-2022, 10:03 PM

7. 
   Roarless20 liked post by Steera1 On thread : rifle change / load/ no bumps etc

   Try removing the plastic bush from the rear of the suppressor and shoot some groups, recently traced the lost accuracy of my bergara to the plastic bush being too tight. Used to shoot fine with the...

   Liked On: 05-10-2022, 07:47 PM

8. 
   Roarless20 liked post by Larskramer On thread : rifle change / load/ no bumps etc

   Thanks to all of you especially steera1, removed bush, set back to zero and shot this 3 shot group.

   Liked On: 05-10-2022, 07:42 PM

9. 
   Roarless20 liked post by smashman On thread : Late evening stinky

   Late in the roar this year I had the rare chance to get out for a hunt. A pig hunter friend had mentioned he'd run across sign of a stag on a ridge not too far from my in-laws place on public...

   Liked On: 05-10-2022, 12:27 PM

10. 
    Roarless20 liked post by smashman On thread : Hiya, from Nelson

    Hi All, Ash here from Nelson. A mate recommended I sign up and post on here. Grew up in paradise and been hunting since little. However, very little for the last 10 years due to family, other...

    Liked On: 05-10-2022, 12:24 PM

11. 
    Roarless20 liked post by iambatman On thread : Sighted in my first rifle

    I just bought my first rifle, a Tikka T3X Lite in .308 Winchester. Chopped to 20 inches and threaded by DPT for one of their suppressors. I've mounted a Leupold VX3 4.5 - 14 x 40 with blued Tikka...

    Liked On: 01-10-2022, 11:31 AM

12. 
    Roarless20 liked post by Pommy On thread : Fill length resizing not using expander button.

    I think you have fallen into the trap of thinking that because some people do it that way and get good results, that it's the only way anyone could possibly get those results. It's not. I have...

    Liked On: 29-09-2022, 09:24 AM

13. 
    Roarless20 liked post by Pommy On thread : Fill length resizing not using expander button.

    If you do not use an expander (or a mandrel), then you'll obviously leave the necks undersized. More or less depending on the brand of the die and thickness of the brass. You are not working the...

    Liked On: 26-09-2022, 02:29 PM

14. 
    Roarless20 liked post by mikee On thread : Fill length resizing not using expander button.

    I use mainly Hornady dies with their included exanders, you do need to polish the expanders well to make resizing easy. To many people spent a lot of time doing stuff that really does not help...

    Liked On: 26-09-2022, 01:49 PM

15. 
    Roarless20 liked post by 7mm Rem Mag On thread : Fill length resizing not using expander button.

    I use all Redding gear, if you want a good vid on not using expander look up a guy by the name of panhandle on youtube and he will take you through all you need to know. I hope this helps

    Liked On: 26-09-2022, 01:09 PM

Page 58 of 78 First ... 84445464748495051525354555657585960616263646566676869707172 ... Last

• Jump to page: