Robojaz
Member

198 Likes

Page 1 of 14 1234567891011121314 Last

• Jump to page:

1. 
   dogmatix liked post by Robojaz On thread : Importing Nightforce scope caps

   Thank you,

   Liked On: 03-09-2024, 12:50 PM

2. 
   Jaco Goosen liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 16-04-2024, 06:45 PM

3. 
   Jaco Goosen liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   Another long post...

   Liked On: 16-04-2024, 06:45 PM

4. 
   dannyb liked post by Robojaz On thread : load data: 3006 / Superformance / 178 ELDX

   Thank you everyone, there is some very good info here. I will start my Superformance/178ELDX journey today

   Liked On: 28-01-2024, 09:05 AM

5. 
   BSA270 liked post by Robojaz On thread : .308 Guru’s

   Barnes 130gr, 2206H getting 3000ft/s out of 18 inch barrel. Kills very well.

   Liked On: 09-08-2023, 11:30 PM

6. 
   Dama dama liked post by Robojaz On thread : .308 Guru’s

   Barnes 130gr, 2206H getting 3000ft/s out of 18 inch barrel. Kills very well.

   Liked On: 07-08-2023, 07:32 PM

7. 
   Nathan F liked post by Robojaz On thread : .308 Guru’s

   Barnes 130gr, 2206H getting 3000ft/s out of 18 inch barrel. Kills very well.

   Liked On: 07-08-2023, 02:40 PM

8. 
   Jukes liked post by Robojaz On thread : Osprey packs

   Tentman equipment list of gear in my photos. Sleep system is Sea to Summit sleeping bag, if I am going to in colder climates I add a Sea to Summit Reactor liner, but it would have to be above...

   Liked On: 21-03-2023, 10:00 AM

9. 
   Seventenths liked post by Robojaz On thread : 162gr eldx

   Likewise I am still running AMAXs at 3000ft/s have never had an issue with them. But only got a few hundred left, so will be interested in people's thoughts on a replacement. Leaning towards the...

   Liked On: 10-01-2023, 04:07 PM

10. 
    Grantn liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    131416

    Liked On: 27-10-2022, 09:24 AM

11. 
    20 Bore liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

    Liked On: 13-08-2021, 10:12 PM

12. 
    ando2506 liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    131416

    Liked On: 05-08-2021, 01:16 AM

13. 
    ando2506 liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    A while back I purchased a second hand Savage Model 110 chambered in 30-06. It was and is a perfectly functional rifle and after a bit of load development manged to get shooting well with a diet of...

    Liked On: 05-08-2021, 01:16 AM

14. 
    veitnamcam liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

    Liked On: 21-05-2021, 02:42 PM

15. 
    veitnamcam liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 21-05-2021, 02:34 PM

Page 1 of 14 1234567891011121314 Last

• Jump to page: