Hi mate, I have used a few 500g bottles of adi 2213sc powders and never have any problem. Yep, it could be the difference from lots to lots. I have worked up some rounds to test. My solution for...
Liked On: 18-09-2020, 06:47 PM
Just in case someone like me run out of the adi 2213sc and got some hodgdon h4831sc for my 300wsm. Same loads with both powders I thought I would get the same results, but the hodgdon h4831sc is...
Liked On: 18-09-2020, 03:30 PM
It is common to have POI shift with suppressor, just sight in your rifle with the suppressor on and shoot with it. Normally the bigger the longer suppressors have better sound reduction, but...
Liked On: 14-09-2020, 11:44 AM
Yep, because too much work for the police to give permit for those stuffs, so no permit for scope anymore. The optic planet won’t ship most rifle scope to nz, you can have a try to find out. ...
Liked On: 12-09-2020, 11:37 AM
I just came back from the range, both loads were loaded last night and shot this morning.
Liked On: 10-09-2020, 05:32 PM
Search “7mm rem mag load data NZ “. Heaps of information on this forum as well. Adi2217, 2225 are the most popular powder
Liked On: 24-08-2020, 10:52 PM
Search “7mm rem mag load data NZ “. Heaps of information on this forum as well. Adi2217, 2225 are the most popular powder
Liked On: 24-08-2020, 10:28 PM
Ar2213sc = hodgdon H4831sc. For the one who is looking for it, there are 3 bottles at Reloader.
Liked On: 21-07-2020, 04:41 PM
Wonderful ! Thanks for sharing!
Liked On: 08-06-2020, 11:20 PM
Working up to 67.3 2213sc powder behind 208 eldm. 2800fts out of 24 inches tikka barrel.
Liked On: 25-04-2020, 10:46 PM
This is ture, but my tikka 300 wsm even over 100 thous off land and factory mag feed, it shoots better than seating it out to land. Modify the mag is easy then get a long bolt stop or just filing...
Liked On: 15-01-2020, 10:12 PM
This is ture, but my tikka 300 wsm even over 100 thous off land and factory mag feed, it shoots better than seating it out to land. Modify the mag is easy then get a long bolt stop or just filing...
Liked On: 15-01-2020, 07:13 AM