RUMPY
Member

3588 Likes

Page 235 of 240 First ... 135185221222223224225226227228229230231232233234235236237238239240 Last

• Jump to page:

1. 
   RUMPY liked post by bigbear On thread : Finally on the wall

   Here is the stag i shot early march last year. 112470112471[ATTACH]112473[/ATTACH

   Liked On: 02-06-2019, 11:42 AM

2. 
   RUMPY liked post by Bobba On thread : Drill grinding weirdness

   As above. You need to thin down or sharpen the web using the corner of your grinding wheel. Takes a bit of practice but once you have mastered it you can drill some pretty big holes with no pilot....

   Liked On: 02-06-2019, 09:41 AM

3. 
   RUMPY liked post by scoped On thread : Drill grinding weirdness

   the cutting faces need to be 180 degrees from each other (parrallel), they also need to be the same length diagonally and the same angle use the corner of your grinding wheel to take some of the...

   Liked On: 02-06-2019, 09:41 AM

4. 
   RUMPY liked post by Maca49 On thread : Drill grinding weirdness

   The tongue / web sometimes gets thicker as the drill is shortened, use a bigger pilot hole ?

   Liked On: 02-06-2019, 09:40 AM

5. 
   RUMPY liked post by Moa Hunter On thread : Chamois

   Ahh yes, the 7mm08 also known as the 'poor mans 270' Just knowing that you have dreamt of owning a 270 would cause the heart of a timid young Tahr to stop !!!

   Liked On: 02-06-2019, 09:38 AM

6. 
   RUMPY liked post by Max Headroom On thread : Gear list for north island day hunts

   The truth about all of the posts above is that you're not likely to need a third to half of the gear listed on a good day in the boonies. BUT If you've slipped and fractured your wrist, night...

   Liked On: 01-06-2019, 08:06 PM

7. 
   RUMPY liked post by thatguy On thread : Noob...

   As I’m new here too, found this tread very helpful also. Thanks guys

   Liked On: 01-06-2019, 12:39 PM

8. 
   RUMPY liked post by Simon On thread : How to start gunsmithing

   Get yourself trained in a trade such as Fitting and Turn, Fitter Welder, Tool Maker etc. The rest will follow once the foundation skills behind being a Gun Smith are learnt and practiced. Good...

   Liked On: 31-05-2019, 11:31 PM

9. 
   RUMPY liked post by Pengy On thread : Gps coordinates

   Ok if using a topo map, but not accurate enough at sea

   Liked On: 31-05-2019, 09:11 PM

10. 
    RUMPY liked post by Max Headroom On thread : Austrian Army Grey Gore-Tex Jacket

    Didn't know Deer wore goretex.

    Liked On: 31-05-2019, 06:00 PM

11. 
    RUMPY liked post by rockland On thread : Weekend wander with the boy.

    That's a superb photo of Ryan at the lake. Well worth getting your local photo print shop to enlarge to A4 size and stick it in a frame. Photo's like that don't come along very often.

    Liked On: 31-05-2019, 11:14 AM

12. 
    RUMPY liked post by zeko On thread : hunting incompetence

    I really don't remember whether I was making a sound -- though I could have been (the pig certainly was); all I was thinking was "bacon and sausage -- bacon and sausage -- IT MUST NOT ESCAPE!!!!" ...

    Liked On: 30-05-2019, 09:08 PM

13. 
    RUMPY liked post by bigbear On thread : SPOT X

    Couple weeks ago my boy and me decided to try spot x for a deer and sure enough spot x proved to be successful.112375

    Liked On: 30-05-2019, 08:51 PM

14. 
    RUMPY liked post by Tararuas hunter On thread : Some Tararuas pics

    Haven't been in the hills since end of April. Have been hunting the Tararuas for a while. began at school in the early 60s, tramping, then got 303 at 14 or so, and carted that around, eventually...

    Liked On: 29-05-2019, 10:31 PM

15. 
    RUMPY liked post by Micky Duck On thread : Okay, who was it?!

    went for interview with safari guide 20 something years back...he had fallow in port hills way back then looking through his photo album saw photo of big "free range " stag...... I mentioned that I...

    Liked On: 29-05-2019, 08:52 PM

Page 235 of 240 First ... 135185221222223224225226227228229230231232233234235236237238239240 Last

• Jump to page: