rupert
Member

302 Likes

Page 10 of 21 First 123456789101112131415161718192021 Last

• Jump to page:

1. 
   Moa Hunter liked post by rupert On thread : BRNO 600 Question

   There are two different factory triggers: single set trigger and standard trigger. Originally, each rifle was supplied with both triggers, one fitted and the other in a little bag with a fitting...

   Liked On: 09-08-2023, 03:14 PM

2. 
   PadLo liked post by rupert On thread : How much pitting is too much?

   Clean out the rust first so that you can see the extent of the pitting.

   Liked On: 26-07-2023, 09:31 PM

3. 
   Micky Duck liked post by rupert On thread : How much pitting is too much?

   Clean out the rust first so that you can see the extent of the pitting.

   Liked On: 24-07-2023, 01:21 PM

4. 
   NAKED_GOOSE liked post by rupert On thread : How much pitting is too much?

   Clean out the rust first so that you can see the extent of the pitting.

   Liked On: 24-07-2023, 12:59 PM

5. 
   Moa Hunter liked post by rupert On thread : How much pitting is too much?

   Clean out the rust first so that you can see the extent of the pitting.

   Liked On: 24-07-2023, 12:33 PM

6. 
   Eat Meater liked post by rupert On thread : Rifle Accuracy Facts

   Free download of this seriously good and out of print book. http://storage.dynamic-arms.com/t-class/books/Rifle%20Accuracy%20Facts%20Full%20v1.1.pdf

   Liked On: 22-06-2023, 09:46 AM

7. 
   NZ_noddy liked post by rupert On thread : Rifle Accuracy Facts

   Free download of this seriously good and out of print book. http://storage.dynamic-arms.com/t-class/books/Rifle%20Accuracy%20Facts%20Full%20v1.1.pdf

   Liked On: 22-06-2023, 08:49 AM

8. 
   Pete_D liked post by rupert On thread : Getting a Farm bike road registered ???

   I had a KLX250 revinned about a year ago, after the rego lapsed. It cost a bit over $500 in Christchurch. The bike was in factory condition, without modifications of any sort.

   Liked On: 01-05-2023, 10:30 PM

9. 
   caberslash liked post by rupert On thread : .308 into .243?

   Anneal the neck after sizing. If you anneal before, there is a possibility for the neck to collapse. If you don't anneal afterwards, the necks will crack later. Polish the inside of your resizing die...

   Liked On: 26-02-2023, 07:58 PM

10. 
    Puffin liked post by rupert On thread : .308 into .243?

    Anneal the neck after sizing. If you anneal before, there is a possibility for the neck to collapse. If you don't anneal afterwards, the necks will crack later. Polish the inside of your resizing die...

    Liked On: 26-02-2023, 04:04 PM

11. 
    Shearer liked post by rupert On thread : Trigger CZ452 17 hmr

    Have you tried altering the sear engagement with a bit of aluminium tape around the trigger pivot, and/or tried a couple of ball point pen springs to increase trigger pull weight or a spacer on your...

    Liked On: 30-01-2023, 11:31 AM

12. 
    HG Man liked post by rupert On thread : How to get rid of an old stock?

    Put them in the free column on this site.

    Liked On: 28-01-2023, 06:51 PM

13. 
    300CALMAN liked post by rupert On thread : How to get rid of an old stock?

    Put them in the free column on this site.

    Liked On: 27-01-2023, 09:47 PM

14. 
    Grey Kiwi liked post by rupert On thread : Bought new bino's...good move or bad?

    What I understand from reviews of Chinese binoculars and my own experience with Chinese scopes is, sometimes, very variable build quality. In the production some will be abysmal and others very good...

    Liked On: 01-01-2023, 10:41 AM

15. 
    caberslash liked post by rupert On thread : 7mm rem mag reloading issues

    What kind of stock? What kind of action? How was the bedding checked? Sounds like a bedding issue.

    Liked On: 22-12-2022, 10:04 PM

Page 10 of 21 First 123456789101112131415161718192021 Last

• Jump to page: