177018 relieved the slot for the trigger guard
Liked On: 30-08-2021, 08:39 PM
177017 rounded the back corners too. I could have relieved the difference from the action but chose not to muck with that... mag still works fine in my long action tikka anyway
Liked On: 30-08-2021, 08:39 PM
177016 had to shave a bit here and ther off the mag to sit home close enough to all ow for the play in the tikka set up. also had to pack the rear of the housing to tighten up tolerances as the back...
Liked On: 30-08-2021, 08:39 PM
177015 had to do a bunch more mucking around to get it to a prefect fit. but its in now and picking up rounds perfectly
Liked On: 30-08-2021, 08:38 PM
So look what finally arrived from the other side of town 4 days later177013
Liked On: 30-08-2021, 08:38 PM
177040 Wild pork roast... shot with the grendel just before lockdown
Liked On: 30-08-2021, 07:59 PM
177037 pillars done, trigger guard glued down. fitted an extra washer under the guard to engage with the pillar. used very light pillars so will need to lay off the rattle gun to tighter the action...
Liked On: 30-08-2021, 07:59 PM
177040 Wild pork roast... shot with the grendel just before lockdown
Liked On: 30-08-2021, 07:04 PM
177037 pillars done, trigger guard glued down. fitted an extra washer under the guard to engage with the pillar. used very light pillars so will need to lay off the rattle gun to tighter the action...
Liked On: 30-08-2021, 07:03 PM
177019 sitting well. I need to relieve the holes for the pillars before I glue this in... and find something to use for pillars lol. And also do a touch more shaping to bring the edge down level...
Liked On: 30-08-2021, 05:13 PM
177019 sitting well. I need to relieve the holes for the pillars before I glue this in... and find something to use for pillars lol. And also do a touch more shaping to bring the edge down level...
Liked On: 30-08-2021, 04:56 PM
177017 rounded the back corners too. I could have relieved the difference from the action but chose not to muck with that... mag still works fine in my long action tikka anyway
Liked On: 30-08-2021, 04:55 PM
177018 relieved the slot for the trigger guard
Liked On: 30-08-2021, 04:55 PM
177015 had to do a bunch more mucking around to get it to a prefect fit. but its in now and picking up rounds perfectly
Liked On: 30-08-2021, 04:47 PM
176604 test bolts are in and it seems I went too far with the mag insert, only by half a mill or so. I need to pack it so the mag clicks in place. scope height is about right. Ill mount the vx6 on...
Liked On: 29-08-2021, 11:54 PM