[ATTACH]176144 Im down to 600 grams which is a good start. 500g will be an easy target so I may aim for 450g before the carbon process. The stock I did for my grendel has just had a bit of resin...
Liked On: 26-08-2021, 10:44 PM
176327 Its about right now. I need to sort my action screws and washers and tighten it up before I glue the plastic in place. That way it'll make sure I dont get a supprise later lol. lockdown...
Liked On: 26-08-2021, 10:41 PM
176327 Its about right now. I need to sort my action screws and washers and tighten it up before I glue the plastic in place. That way it'll make sure I dont get a supprise later lol. lockdown...
Liked On: 26-08-2021, 02:48 PM
Thanks for that video, I have watched this guy do some others in the past, this was more tech shape so gives me some confidence that the stock will be not too hard to cover
Liked On: 26-08-2021, 02:46 PM
Thanks for your thoughts, Its going to be front heavy anyways so if I bore holes in the butt looking to drop 35 grams and then a bit more in the barrel channel (Id rather cut the inside than the...
Liked On: 26-08-2021, 09:22 AM
176237 Its a tight fit, but thats what you get with the 156's in a 6.5/06AI I will load this witht the 130 Berger hunting VLD's and keep the 156's for the 28" barrel version. That pic is with me...
Liked On: 26-08-2021, 01:35 AM
176235 Not bad fitting for a massive bit on a dye grinder. Dremel would be handy lol. Not that it matters as it wll all be covered with carbon... the gap at the back was due to me having to push it...
Liked On: 26-08-2021, 01:34 AM
176234 Got it aligned alright, just need to bring the back down a few mils so the bolt can pick up the round, at present it slides clen over the top
Liked On: 25-08-2021, 11:45 PM
[ATTACH]176144 Im down to 600 grams which is a good start. 500g will be an easy target so I may aim for 450g before the carbon process. The stock I did for my grendel has just had a bit of resin...
Liked On: 25-08-2021, 07:34 PM
[ATTACH]176144 Im down to 600 grams which is a good start. 500g will be an easy target so I may aim for 450g before the carbon process. The stock I did for my grendel has just had a bit of resin...
Liked On: 25-08-2021, 10:53 AM
176143 I may hollow out the forend and the butt to bring the weight down. I figure Ill gain a bunch with the resin in the carbon so lets get it as light as possible first. this timber has good...
Liked On: 25-08-2021, 10:53 AM
176137 Started 176137shaping it a bit before cutting magwell
Liked On: 25-08-2021, 10:25 AM
176143 I may hollow out the forend and the butt to bring the weight down. I figure Ill gain a bunch with the resin in the carbon so lets get it as light as possible first. this timber has good...
Liked On: 25-08-2021, 10:17 AM
176025 Great help from my daughter making playdough for the wells in the stock at the trigger and saftey ports. I rubbed the action down with shoe nugget to ensure it breaks clean tomorrow... never...
Liked On: 25-08-2021, 09:39 AM
176137 Started 176137shaping it a bit before cutting magwell
Liked On: 25-08-2021, 09:39 AM