Shamus_
Member

1222 Likes

Page 16 of 82 First ... 2345678910111213141516171819202122232425262728293066 ... Last

• Jump to page:

1. 
   Shamus_ liked post by Mangusta On thread : 100 yrs old and still going strong

   Heres a few that are 100 years...1928ish oberndorf 98 type b ,3006255256

   Liked On: 19-07-2024, 07:23 PM

2. 
   Shamus_ liked post by akaroa1 On thread : Sand Casting. Who's done / doing it ?

   I had a great meeting with the Casting guy yesterday. I'm just going to throw a whole lot of money at it and get the professionals to cast all the hammers I want from the fragments of the...

   Liked On: 18-07-2024, 10:50 AM

3. 
   Shamus_ liked post by Shearer On thread : 6mm creedmoore

   I have a Tikka T3x .243win with a factory 1:8 twist barrel. It is left handed and two were bought into the country late last year. I am using the 108 ELD-M from the standard 22.4" barrel @2830fps...

   Liked On: 17-07-2024, 09:59 PM

4. 
   Shamus_ liked post by 25/08 IMP On thread : Sand Casting. Who's done / doing it ?

   Yip I work in foundry's for the best part 20 years covered in iron dust and black from the sand dust knocking out the castings once poured. A real dirty job but some of the things I made were...

   Liked On: 16-07-2024, 12:51 PM

5. 
   Shamus_ liked post by 25/08 IMP On thread : Sand Casting. Who's done / doing it ?

   I did my trade as a molder greensand moulder Then things changed to hardsand but I've been out of that game for many years now. Shrinkage rates is more a pattern maker and I'm sure there is...

   Liked On: 15-07-2024, 10:13 PM

6. 
   Shamus_ liked post by Joe_90 On thread : 223 on deer

   Pic of the rest of the rig 254793

   Liked On: 14-07-2024, 05:31 PM

7. 
   Shamus_ liked post by woods223 On thread : Latest FSA video

   Just watched this video, can't see anything wrong with contents. I'm not registered, will do so if I have a trigger event or otherwise have to. Having interacted with FSA a few times getting...

   Liked On: 13-07-2024, 12:52 PM

8. 
   Shamus_ liked post by Yesmate On thread : GCNZ, alpha carbines being lined up again.

   they are clearly designed and made as a loop hole to accessing a pistol, no one would design a carbine rifle that ugly and as a coincidence that it cuts down to a perfect pistol.

   Liked On: 11-07-2024, 07:48 PM

9. 
   Shamus_ liked post by Husky1600#2 On thread : Packing meat for carry out (Load shelf packs)

   Buy a big dry bag from one of the "budget" outfits like Kathmandu or Torpedo 7 etc. Doesnt have to be one of the heavier vinyl type, they also come in lighter weight fabric like coated nylon. I have...

   Liked On: 09-07-2024, 09:23 AM

10. 
    Shamus_ liked post by Jt89 On thread : Chassis

    Rokstok? https://www.unknownmunitions.com/product-category/rifle-parts/stock-chassis/rokstok/ I followed the thread on Rokslide and listened to the podcast about the design of it. Vertical...

    Liked On: 08-07-2024, 05:05 PM

11. 
    Shamus_ liked post by Hunter_Nick On thread : Maven RS1.2 2.5-15x44 FFP review

    So my new Maven scope arrived this week, and a number of the lads have asked me for a review, so here you go! Mounted to my Tikka .223. The eye relief is good and long, so it mounts quite far...

    Liked On: 06-07-2024, 07:51 PM

12. 
    Shamus_ liked post by 300_BLK On thread : KROSEG Sako A1 Carbon Fibre Stock

    Shout out to Kroseg precision, got my sako A1 223 back with a carbon fibre stock. Slightly higher comb than factory, very light - 500gms It’s a modified Howa mini Hunter stock with sling studs...

    Liked On: 05-07-2024, 11:37 AM

13. 
    Shamus_ liked post by gimp On thread : Testing a conventional approach to load development

    From a practical perspective it becomes impractical to assess the difference between loads sensibly, hence my approach that it is best to take the shortest route to find one where you can have high...

    Liked On: 04-07-2024, 02:10 PM

14. 
    Shamus_ liked post by Makros On thread : Testing a conventional approach to load development

    Funnily enough, with these SD for each group, for an 80% power (80/100 times you test you will detect the statistically significant difference in mean group radius and reject the null hypothesis they...

    Liked On: 04-07-2024, 01:07 PM

15. 
    Shamus_ liked post by gimp On thread : Testing a conventional approach to load development

    The targex group I have the 4x 5rd component groups available on separate targets (that were precisely overlaid over the 1 that contains the composite group) allowing me to precisely measure X & Y...

    Liked On: 04-07-2024, 12:12 PM

Page 16 of 82 First ... 2345678910111213141516171819202122232425262728293066 ... Last

• Jump to page: