17.5 is a great bottle opener........don't ask me how I know....?
Liked On: 05-10-2024, 03:00 PM
I accidentally crimped some cast bullet loads a while back. Neither those electrical crimper nor my RCBS collet type will pull them. Sooo, I'm just shooting them. :) Don't forget, minor...
Liked On: 07-09-2024, 04:07 PM
303 will do that with factory loads :thumbsup:
Liked On: 07-09-2024, 04:06 PM
used to pull 1000s of milspec with my new now 40yr old forster puller , just turn bar on top but trick was first reseat bullet 30thou deeper to crack tar or crimp etc then pull in a second stage...
Liked On: 07-09-2024, 04:03 PM
I am going to play devils advocate here and it really pains me to do it in this case with GCNZ ...... I was surprised when I saw these available in shops as it was always my understanding that...
Liked On: 18-08-2024, 12:11 AM
but you forget some were recently onsold to gangs..bought by an ex allblack.... knowing full well where and why they were going.... that was a major own goal by a licenced person....bastard needs a...
Liked On: 17-08-2024, 11:38 PM
Who says 44mm for 15 shots is even bad?
Liked On: 17-08-2024, 11:23 PM
Those ones that didn't go off look almost cupped from the firing pin strike to me - I would suggest that the issue may be related to what is for some reason known as primer sensitising during the...
Liked On: 17-08-2024, 11:11 PM
What upsets me most about all this, is that he threw the powder away. Why did he throw the powder away? Not only do I reuse the powder from dismantled cartridges, I reuse the primers too. And the...
Liked On: 17-08-2024, 11:10 PM
Hey Friwi, It is a 9 1/2 twist. I've settled on the Speer 270gr as the 285 is on the edge of stability. The Norma 285 is more pointed and a flyshit longer, so not quite as stable as Hornady or...
Liked On: 16-08-2024, 07:27 PM
Mine is 1:10 and so far anything below 64grn works for me. Basic 55 grn loads are plurry good,would be very surprised if yours won't group them nicely,haven't body shot deer with them ( not counting...
Liked On: 07-08-2024, 05:50 PM
Just one more ...
Liked On: 07-08-2024, 05:45 PM
Greetings, Looks as though the projectiles are seated too long. The marks are from the rifling. Either the adjustment on your die has moved or if you have just started a new box of projectiles then...
Liked On: 06-08-2024, 03:32 PM
Im running 110gr Barnes TTSX in my 308. Perfect mushtoom every time. Straitline penetration, mostly pass right throuh anything I shoot at. Longest kill was at 570m on a Kudu. It still exited.
Liked On: 06-08-2024, 03:30 PM
I initially bought a SCA hardcase but it was way too long to fit across my vehicles in the seats or in the boot so I returned it the next day. Instead I paid more and bought one of these...
Liked On: 27-07-2024, 01:31 AM