shooternz
Member

983 Likes

Page 14 of 66 First 1234567891011121314151617181920212223242526272864 ... Last

• Jump to page:

1. 
   winaa liked post by shooternz On thread : 338 Federal versus 358 Winchester

   How about this one 82231 No gas check but ideal for subs

   Liked On: 16-02-2022, 03:54 PM

2. 
   veitnamcam liked post by shooternz On thread : Committed the newby mistake of seating too far...

   It happens to everyone with cast bullets at some time specially with a new gun, Cast bullets don't like being jammed into the rifling just a light touch; better to seat to the crimp groove if it has...

   Liked On: 15-02-2022, 10:45 PM

3. 
   Micky Duck liked post by shooternz On thread : Committed the newby mistake of seating too far...

   It happens to everyone with cast bullets at some time specially with a new gun, Cast bullets don't like being jammed into the rifling just a light touch; better to seat to the crimp groove if it has...

   Liked On: 15-02-2022, 09:16 PM

4. 
   winaa liked post by shooternz On thread : .277 bullet mold

   Not a good idea the 270 is not really suitable for cast bullet there are few mold s available, the case capacity is way too large the barrel twist is too fast velocity is limited to 1500-1800fps, No...

   Liked On: 15-02-2022, 02:07 PM

5. 
   winaa liked post by shooternz On thread : Who Is Using 350 Legend ?

   I know you are after a 350 Legend but Winchester dropped the ball with it unless you are an AR15 user, Have you thought about a .358 Winchester better selection of bullet weights, I do cast .358's...

   Liked On: 15-02-2022, 12:36 PM

6. 
   6x47 liked post by shooternz On thread : Notched case - should I use it?

   I would not worry about it; it is in the web of the case the most solid part of the case you would have to do something seriously stupid to blow a case up there; case head separation happens a good...

   Liked On: 08-02-2022, 07:59 AM

7. 
   Moa Hunter liked post by shooternz On thread : Notched case - should I use it?

   I would not worry about it; it is in the web of the case the most solid part of the case you would have to do something seriously stupid to blow a case up there; case head separation happens a good...

   Liked On: 08-02-2022, 07:34 AM

8. 
   Micky Duck liked post by shooternz On thread : Notched case - should I use it?

   I would not worry about it; it is in the web of the case the most solid part of the case you would have to do something seriously stupid to blow a case up there; case head separation happens a good...

   Liked On: 06-02-2022, 08:49 PM

9. 
   Micky Duck liked post by shooternz On thread : importing projectiles?

   Yes Youshop is a joke real PC Nazi's, They class Gas Checks as Ammunition, The problem is USPS are not sending small parcels to NZ and a lot of other places their reason is lack of flights which I...

   Liked On: 05-02-2022, 05:35 PM

10. 
    zimmer liked post by shooternz On thread : importing projectiles?

    I buy Knives on Ebay, Kitchen and hunting Knives I collect Schrade knives they come via USPS and NZ Post So NZ Post does ship hunting Knives they just don't know it. If you want knives check Ebay...

    Liked On: 05-02-2022, 08:15 AM

11. 
    WillB liked post by shooternz On thread : Projectile performance

    If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

    Liked On: 21-01-2022, 07:12 PM

12. 
    Pete_D liked post by shooternz On thread : ADI 2207 and short barrel 308

    Adi 2207 is simalar in burn rate to 4198 I use both in my .222 Rem just use the ADI data you will be fine the muzzle flash could be less than the slow powders you will also use less.

    Liked On: 15-01-2022, 05:01 PM

13. 
    300CALMAN liked post by shooternz On thread : Projectile performance

    If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

    Liked On: 12-01-2022, 10:02 PM

14. 
    Moa Hunter liked post by shooternz On thread : Casting for an SMLE

    Get in touch I have some .314" 210 grain cast if you want to try some

    Liked On: 12-01-2022, 06:31 AM

15. 
    Moa Hunter liked post by shooternz On thread : Projectile performance

    If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

    Liked On: 06-01-2022, 03:02 PM

Page 14 of 66 First 1234567891011121314151617181920212223242526272864 ... Last

• Jump to page: