shooternz
Member

983 Likes

Page 15 of 66 First 123456789101112131415161718192021222324252627282965 ... Last

• Jump to page:

1. 
   caberslash liked post by shooternz On thread : Projectile performance

   If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

   Liked On: 05-01-2022, 11:30 PM

2. 
   Barnes130 liked post by shooternz On thread : Gunsmith Howard C Lopdell

   I met Howard a few times he was a friend my Gunsmith mate, His favourite rifle action was the Brno Model 21 chambered in 7x57 I believe, Went with my mate to Howards place to pick out some Walnut...

   Liked On: 02-01-2022, 10:54 AM

3. 
   Steelisreal liked post by shooternz On thread : Gunsmith Howard C Lopdell

   I met Howard a few times he was a friend my Gunsmith mate, His favourite rifle action was the Brno Model 21 chambered in 7x57 I believe, Went with my mate to Howards place to pick out some Walnut...

   Liked On: 01-01-2022, 08:33 PM

4. 
   Shamus_ liked post by shooternz On thread : Gunsmith Howard C Lopdell

   I met Howard a few times he was a friend my Gunsmith mate, His favourite rifle action was the Brno Model 21 chambered in 7x57 I believe, Went with my mate to Howards place to pick out some Walnut...

   Liked On: 01-01-2022, 08:12 PM

5. 
   Trav-6mmrem liked post by shooternz On thread : Gunsmith Howard C Lopdell

   I met Howard a few times he was a friend my Gunsmith mate, His favourite rifle action was the Brno Model 21 chambered in 7x57 I believe, Went with my mate to Howards place to pick out some Walnut...

   Liked On: 01-01-2022, 07:02 PM

6. 
   Micky Duck liked post by shooternz On thread : Gunsmith Howard C Lopdell

   I met Howard a few times he was a friend my Gunsmith mate, His favourite rifle action was the Brno Model 21 chambered in 7x57 I believe, Went with my mate to Howards place to pick out some Walnut...

   Liked On: 01-01-2022, 06:41 PM

7. 
   Micky Duck liked post by shooternz On thread : Cast bullet Varminting / Medium game Project

   My 151HP recovered from a goat velocity 1040fps ATTACH]186468[/ATTACH] All the recovered bullets look like this most heart/lung shots exit

   Liked On: 25-12-2021, 10:23 AM

8. 
   rossi.45 liked post by shooternz On thread : Cast bullet Varminting / Medium game Project

   My 151HP recovered from a goat velocity 1040fps ATTACH]186468[/ATTACH] All the recovered bullets look like this most heart/lung shots exit

   Liked On: 24-12-2021, 07:39 AM

9. 
   Moa Hunter liked post by shooternz On thread : Cast bullet Varminting / Medium game Project

   Don't go too hard with lead about 50/50 lead to wheel weights and add a little tin to help it flow makes very good bullets for HP' and solid; velocity needs to be 1200fps for solids to expand,...

   Liked On: 24-12-2021, 07:39 AM

10. 
    Moa Hunter liked post by shooternz On thread : Cast bullet Varminting / Medium game Project

    My 151HP recovered from a goat velocity 1040fps ATTACH]186468[/ATTACH] All the recovered bullets look like this most heart/lung shots exit

    Liked On: 24-12-2021, 07:35 AM

11. 
    SixtyTen liked post by shooternz On thread : Cast bullet Varminting / Medium game Project

    My 151HP recovered from a goat velocity 1040fps ATTACH]186468[/ATTACH] All the recovered bullets look like this most heart/lung shots exit

    Liked On: 23-12-2021, 10:06 PM

12. 
    winaa liked post by shooternz On thread : Cast bullet Varminting / Medium game Project

    Don't go too hard with lead about 50/50 lead to wheel weights and add a little tin to help it flow makes very good bullets for HP' and solid; velocity needs to be 1200fps for solids to expand,...

    Liked On: 21-12-2021, 04:26 PM

13. 
    Micky Duck liked post by shooternz On thread : Casting for an SMLE

    You will find that .314" cast bullets shoot better than the smaller diameters, Not many .303 barrels are even close to .312" even new barrels are more likely to be 313" The throats on them a worn...

    Liked On: 17-12-2021, 04:16 PM

14. 
    SixtyTen liked post by shooternz On thread : Casting for an SMLE

    Get in touch I have some .314" 210 grain cast if you want to try some

    Liked On: 16-12-2021, 06:11 PM

15. 
    Micky Duck liked post by shooternz On thread : Casting for an SMLE

    Get in touch I have some .314" 210 grain cast if you want to try some

    Liked On: 14-12-2021, 05:36 PM

Page 15 of 66 First 123456789101112131415161718192021222324252627282965 ... Last

• Jump to page: