I own the Lee kit and wouldn't reccomend it to anyone (the lee press has a lot of flex in it making it hard to get consistent results especially if your learning) :D either the hornandy or rcbs kit...
Liked On: 18-09-2019, 11:34 PM
See if your local range has a rimfire Silhouette shoot. These are tiny steel targets shot from 40m out to 100m all from standing. Really good practise and maybe someone there will help you out with a...
Liked On: 18-09-2019, 11:30 PM
Phosphorus compounds ignite on exposure to air, coupled with fact that they will not be at all accurate or hard hitting with the compound removed. Your best bet is to buy some sporting projectiles...
Liked On: 18-09-2019, 09:19 PM
Quickload says Max with 2206H and 180 gn projs is 42.0 gn's for nearly 2600 fps (from a 24.5" barrel) - a very snorty but well balanced load I'd say with all powder burnt - Its MAX so work up to it....
Liked On: 16-09-2019, 08:28 PM
Cordite
Liked On: 16-09-2019, 08:26 PM
That is a quite common occurrence as dies often have in their instructions to wind down to to the shellholder.....which is a "nominal" lenght as actual sizing will depend on brass brand/number of...
Liked On: 21-08-2019, 12:04 AM
Rather like the 8x57 jrs have been using this in a mates gun in France for the last few years.....it stops shit:thumbsup: Not bad on the shoulder either.111838
Liked On: 24-05-2019, 07:23 PM
Umm wouldn't recommend the 303, they are not the most accurate. Don't know what happened but couldn't get better then 2-3 moa with all types of loads.
Liked On: 24-05-2019, 07:04 PM
Its difficult to hammer a jacketed round out of a barrel I know Ive had to!
Liked On: 21-05-2019, 09:14 PM
00 buckshot............
Liked On: 21-05-2019, 09:13 PM
Sierra Bullets has a Redding T-7 that they loaded one million rounds on it and when tested it had zero run out and is as new. There are some news articles/press releases out there on it. Yes the...
Liked On: 21-05-2019, 09:04 PM
I think the co ax and the T7 are in the same price bracket ....close I moved from BB2 to a T7 and really like it. There was nothing wrong with the BB2 and it is a great smooth press, they are...
Liked On: 21-05-2019, 09:03 PM
I've got a Forster Co-Ax and a Redding T7 turret press. There's not much the Redding can't do and its way more convenient to use when reloading multiple calibres. The Forster is great for resizing...
Liked On: 21-05-2019, 09:02 PM
Co-ax, it is in a different league. Both the other presses are nice, nothing wrong with either of them.
Liked On: 21-05-2019, 09:02 PM
If a 100 grain 6mm bullet is touted as being suitable for 90% of NZ game, what is a120 grain 25 calibre bullet capable of? I would say easily just as much.
Liked On: 03-05-2019, 03:37 PM