shooternz
Member

983 Likes

Page 22 of 66 First ... 89101112131415161718192021222324252627282930313233343536 ... Last

• Jump to page:

1. 
   7mmwsm liked post by shooternz On thread : Projectile performance

   If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

   Liked On: 14-08-2021, 08:27 AM

2. 
   zimmer liked post by shooternz On thread : Parker Hale ‘NEVER NICKEL’

   You are correct Parker Hale never nickel was use to stop meal fouling by Full bore shooters I have a bottle of it I got when I bought a retired No4 Full bore rifle they stopped using it when the NRA...

   Liked On: 25-07-2021, 05:20 PM

3. 
   veitnamcam liked post by shooternz On thread : Closing the bolt...fire a cartridge?

   Yes it can fire I had it happen to me with a Remington 700 not because of a lightend trigger it was an unburnt powder kennel in the trigger stopped the sear engaging fully plus a 32 pound firing...

   Liked On: 25-07-2021, 05:02 PM

4. 
   Finnwolf liked post by shooternz On thread : Parker Hale ‘NEVER NICKEL’

   You are correct Parker Hale never nickel was use to stop meal fouling by Full bore shooters I have a bottle of it I got when I bought a retired No4 Full bore rifle they stopped using it when the NRA...

   Liked On: 25-07-2021, 04:48 PM

5. 
   Micky Duck liked post by shooternz On thread : .303 Cast bullets

   Looked into it but the kits that are available don't crimp on to the bullet like the commercial ones do, Ok for personal use but I don't think customers would appreciate getting a 100 bullets with...

   Liked On: 26-06-2021, 06:36 PM

6. 
   Cordite liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 24-06-2021, 11:43 PM

7. 
   Micky Duck liked post by shooternz On thread : .303 Cast bullets

   I have only shot 10 of them, selling them so fast i never have any left for myself, A friend says 24.0 grains 2206H is good 2205 or 2207 starting at 20.0 grains should be ok also IMR 3031 at 20.0...

   Liked On: 23-06-2021, 08:07 PM

8. 
   Rees liked post by shooternz On thread : ruger 1 303s in nz

   There were a few came in I saw one fore sale about 15 years ago, I think collectors snapped them up never to see the light of day again, From what I have read they are only good for cast bullets the...

   Liked On: 23-06-2021, 04:26 AM

9. 
   Rees liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 23-06-2021, 04:25 AM

10. 
    Three O'Three liked post by shooternz On thread : .303 Cast bullets

    I have only shot 10 of them, selling them so fast i never have any left for myself, A friend says 24.0 grains 2206H is good 2205 or 2207 starting at 20.0 grains should be ok also IMR 3031 at 20.0...

    Liked On: 22-06-2021, 11:40 PM

11. 
    mimms2 liked post by shooternz On thread : Powder for 303 150's

    I have never had any luck with 150 gr in any of the .303's I have loaded for always got better accuracy with 174 and 180 and the best was 215 gr Norma, Woodleigh still makes the 215 gr go to...

    Liked On: 22-06-2021, 03:09 PM

12. 
    veitnamcam liked post by shooternz On thread : .303 Cast bullets

    Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

    Liked On: 21-06-2021, 08:44 PM

13. 
    Micky Duck liked post by shooternz On thread : .303 Cast bullets

    Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

    Liked On: 21-06-2021, 08:11 PM

14. 
    rossi.45 liked post by shooternz On thread : The Lever Aficionados Thread

    Hi guys, I am thinking about getting a new mould for the 30/30, Just posting here to see if there is any interest from you lever action shooters in a 170 grain FP cast bullet it will be a clone of...

    Liked On: 09-06-2021, 07:23 PM

15. 
    rewa liked post by shooternz On thread : My first load development

    Don't worry about velocity just work on the accuracy work up a few 10ths of a grain and see it the accuracy improves or not, then shoot in at 200m and 300m you can work out the velocity by the drop...

    Liked On: 29-05-2021, 08:59 PM

Page 22 of 66 First ... 89101112131415161718192021222324252627282930313233343536 ... Last

• Jump to page: