shooternz
Member

983 Likes

Page 28 of 66 First ... 1415161718192021222324252627282930313233343536373839404142 ... Last

• Jump to page:

1. 
   Rated M for Magnum liked post by shooternz On thread : IMR 4064 in 308

   Hornady list IMR 4064 with a 162 grain from 32.3 to 39.6 very close to 2208, I used it years ago for target loads in .308's with 168 MK great powder a little coarse grained

   Liked On: 18-09-2020, 12:33 PM

2. 
   Tommy liked post by shooternz On thread : Reloading Finocchi 380 / 9 x 17 salve = blank ..............Whatever that means.

   Drilling out the primer pocket for shotgun primers works well did it to a .22 Hornet and shot air rifle pellets with it would be ok in a .380 plenty loud enough

   Liked On: 16-09-2020, 09:06 PM

3. 
   Micky Duck liked post by shooternz On thread : Reloading Finocchi 380 / 9 x 17 salve = blank ..............Whatever that means.

   Drilling out the primer pocket for shotgun primers works well did it to a .22 Hornet and shot air rifle pellets with it would be ok in a .380 plenty loud enough

   Liked On: 16-09-2020, 08:52 PM

4. 
   Teggy liked post by shooternz On thread : 7.5x55 swiss

   I have loaded for one not your typical K31 mine has a 1:13" Tru elite barrel I shoot Sierra 155 PALMA in it, Your groove diameter is .306" and bore is .297" so take care working up loads the Sierra...

   Liked On: 10-09-2020, 12:21 AM

5. 
   Bill999 liked post by shooternz On thread : Hornady Sub-x

   You are right at subsonic velocity all bullets have much the same trajectory no matter how high their BC so pick a bullet that has the best shape to deliver the energy to the target, Longer range...

   Liked On: 05-09-2020, 04:27 AM

6. 
   GWH liked post by shooternz On thread : QuickLoad?

   Not any more ADI makes all three been verified by a couple of guys shooting all three powders in .44 mag revolvers at HMS matches same load same bullet same velocity, It is an excellent powder for...

   Liked On: 27-08-2020, 02:27 PM

7. 
   Bill999 liked post by shooternz On thread : Subsonic action

   I just use Hoppes No9 solvent and occasionally JB Paste, My .357 mag S&W 586 has had over 70.000 cast bullets through it and has never had a bronze brush down the barrel, only ever cleaned it with...

   Liked On: 25-08-2020, 09:09 AM

8. 
   tikka liked post by shooternz On thread : Subsonic action

   I just use Hoppes No9 solvent and occasionally JB Paste, My .357 mag S&W 586 has had over 70.000 cast bullets through it and has never had a bronze brush down the barrel, only ever cleaned it with...

   Liked On: 17-08-2020, 08:55 AM

9. 
   grandpamac liked post by shooternz On thread : Old Scopes

   You never regret buying an old high quality European scope I have a few dating back to the sixtes the glass is superior to some of the modern scopes costing two to three times what you would for...

   Liked On: 17-08-2020, 08:09 AM

10. 
    Micky Duck liked post by shooternz On thread : Old Scopes

    You never regret buying an old high quality European scope I have a few dating back to the sixtes the glass is superior to some of the modern scopes costing two to three times what you would for...

    Liked On: 16-08-2020, 07:10 PM

11. 
    Shearer liked post by shooternz On thread : Subsonic action

    I just use Hoppes No9 solvent and occasionally JB Paste, My .357 mag S&W 586 has had over 70.000 cast bullets through it and has never had a bronze brush down the barrel, only ever cleaned it with...

    Liked On: 16-08-2020, 09:38 AM

12. 
    ebee liked post by shooternz On thread : Subsonic action

    I just use Hoppes No9 solvent and occasionally JB Paste, My .357 mag S&W 586 has had over 70.000 cast bullets through it and has never had a bronze brush down the barrel, only ever cleaned it with...

    Liked On: 16-08-2020, 09:10 AM

13. 
    Cordite liked post by shooternz On thread : Subsonic action

    At subsonic it should never foul just clean with solvent and a few patches it is like a big .22RF, The lube is mostly wax a bit like car wax, all that is in the bore is powder residue no scrubbing...

    Liked On: 14-08-2020, 10:54 PM

14. 
    Micky Duck liked post by shooternz On thread : .308 vs .300blk

    If you don't hand load then it is the 300BLK subsonic loads for .308 are not readily available unless custom loaded by some one.

    Liked On: 14-08-2020, 08:58 PM

15. 
    MB liked post by shooternz On thread : .308 vs .300blk

    If you don't hand load then it is the 300BLK subsonic loads for .308 are not readily available unless custom loaded by some one.

    Liked On: 14-08-2020, 07:02 PM

Page 28 of 66 First ... 1415161718192021222324252627282930313233343536373839404142 ... Last

• Jump to page: