shooternz
Member

983 Likes

Page 33 of 66 First ... 1920212223242526272829303132333435363738394041424344454647 ... Last

• Jump to page:

1. 
   charliehorse liked post by shooternz On thread : Reloading lesson

   Reading is the best way to learn check this book out I have a couple of other books by this dude easy to follow and he knows what he is talking about U-tubers can be dangerous, Zediker Publishing...

   Liked On: 24-11-2019, 12:39 PM

2. 
   Micky Duck liked post by shooternz On thread : Shooternz cast bullets

   I have the 415 grain that rambo used not HP but the lead is as soft as possible and still cast properly, i am casting a couple of hundred for an order in about a week if you want some. Email...

   Liked On: 22-09-2019, 10:12 PM

3. 
   Micky Duck liked post by shooternz On thread : What happens when your case has lots of room left?

   If you have to use a drop tube with the .223 and .308 you are using too slow a powder, AR2206H is a good powder for both cartridges, the 303 6.5x55 and 7.5x55 are some of the earliest smokeless...

   Liked On: 16-09-2019, 09:27 PM

4. 
   Pengy liked post by shooternz On thread : Shooternz cast bullets

   Put in an order I am getting enough orders to keep me busy with out listing on TM I just organise my casting sessions to suit what I have orders for as long as your not in a hurry I have a couple...

   Liked On: 11-09-2019, 10:35 AM

5. 
   Micky Duck liked post by shooternz On thread : First crack at reloading

   I have a Rockchucker and a Lyman Crusher11 I thought they were pretty solid but no they do flex about the same I have a Ruger No 1 in 6mmBR tight chambered after a number of reloads the brass needed...

   Liked On: 22-08-2019, 07:27 PM

6. 
   Sideshow liked post by shooternz On thread : Hunting in France. Differences to NZ. Just for reference

   The rioters are the grubby peasants not suitable people to have hunting licences

   Liked On: 19-08-2019, 10:17 AM

7. 
   rewa liked post by shooternz On thread : 6.5CM craze

   It was designed for American cross the course match shooting at 200 300 600 yards it has lower recoil than the .308 and heavier projectiles than the 5.56 and has better 1000 yard performance than...

   Liked On: 03-06-2019, 10:54 PM

8. 
   Tim Dicko liked post by shooternz On thread : Best single stage press (Which model)?

   I have a Rockchucker made in 1965 it is still as tight and smooth as when it left the factory you will never wear out any of the big name presses in a couple of life times.

   Liked On: 21-05-2019, 10:03 PM

9. 
   Micky Duck liked post by shooternz On thread : 6.5CM craze

   It was designed for American cross the course match shooting at 200 300 600 yards it has lower recoil than the .308 and heavier projectiles than the 5.56 and has better 1000 yard performance than...

   Liked On: 21-05-2019, 09:05 PM

10. 
    Bagheera liked post by shooternz On thread : National Shooting Competition

    It has been done there was a shoot at the Tokoroa Sport Shooting Complex in Feb open to anyone with a sporting rifle .22RF and Centrefire matches Fourteen competitors turned up where were you guys it...

    Liked On: 03-05-2019, 04:16 PM

11. 
    mopheadrob liked post by shooternz On thread : priming on an old Hornady press

    I have a later model than that one still the same different colour, The one in the photo is a Pacific reloading tools one Hornady bought them out years ago the press will out last you no worries, A...

    Liked On: 21-04-2019, 09:37 AM

12. 
    mopheadrob liked post by shooternz On thread : priming on an old Hornady press

    What he says, the cheapest hand primer is the Lee you just need to add shell holders for the calibres you load for, Reloader Supplies have them and sell online.

    Liked On: 21-04-2019, 09:36 AM

13. 
    muzr257 liked post by shooternz On thread : priming on an old Hornady press

    I have a later model than that one still the same different colour, The one in the photo is a Pacific reloading tools one Hornady bought them out years ago the press will out last you no worries, A...

    Liked On: 20-04-2019, 03:05 PM

14. 
    muzr257 liked post by shooternz On thread : priming on an old Hornady press

    What he says, the cheapest hand primer is the Lee you just need to add shell holders for the calibres you load for, Reloader Supplies have them and sell online.

    Liked On: 20-04-2019, 03:04 PM

15. 
    berg243 liked post by shooternz On thread : MSSA buyback

    Had some advice from a real Policeman one that owns and shot AR15's, He said don't fill in any forms, There are some court cases looming that could change things, as usual with these idiots that...

    Liked On: 20-04-2019, 01:04 PM

Page 33 of 66 First ... 1920212223242526272829303132333435363738394041424344454647 ... Last

• Jump to page: