shooternz
Member

983 Likes

Page 41 of 66 First ... 2728293031323334353637383940414243444546474849505152535455 ... Last

• Jump to page:

1. 
   ebf liked post by shooternz On thread : Powder options for 14 inch barrel

   Try 4064 nice and bulky and 139/140 grain bullets, a full case is not necessary with medium and fast powders

   Liked On: 26-11-2018, 10:55 AM

2. 
   gadgetman liked post by shooternz On thread : reloading press

   Redding Lyman RCBS Forster Hornady Stay away from Lee, if a press is going to break it will be a Lee before any other, I have abused my RCBS Rockchucker since 1970 never had problem with it same...

   Liked On: 26-11-2018, 09:23 AM

3. 
   Gusto liked post by shooternz On thread : 22-250 loading advice

   If you only want to shoot varmints use a 52/53 grain match bullet and 2206H or 2208 don't worry about if the case is full with medium powders it doesn't matter, If you can get some H380 powder try...

   Liked On: 26-11-2018, 06:56 AM

4. 
   Tommy liked post by shooternz On thread : reloading press

   Redding Lyman RCBS Forster Hornady Stay away from Lee, if a press is going to break it will be a Lee before any other, I have abused my RCBS Rockchucker since 1970 never had problem with it same...

   Liked On: 25-11-2018, 06:25 PM

5. 
   Pete_D liked post by shooternz On thread : Low power scopes.....recomendations

   If you are on a tight budget go for the Leupold 1-4x20 or the 1.5-5 if you have more cash both are 1" tubes I prefer the 1.5-5 it has better optics get the German #4 reticule if you can, My current...

   Liked On: 25-11-2018, 06:15 PM

6. 
   madjon_ liked post by shooternz On thread : .452 bore vs .455 cast projectiles

   Get a Lee push through size die and size them down I have sized .459" cast bullets to .452" as long as the cartridge will chamber you are OK with low velocity loads, lube the bullets before sizing...

   Liked On: 24-11-2018, 10:36 AM

7. 
   outlander liked post by shooternz On thread : .22 silencers

   Yep that's them they were $40 many years ago, Thats inflation for you probably cost more that your rifle

   Liked On: 21-11-2018, 01:54 PM

8. 
   WillB liked post by shooternz On thread : Monolithic Projectiles

   Most lead contamination is from shooting at indoor ranges with out ventilation there is lead in the priming compound and lead dust from impact melting lead does not put lead in the air only if it is...

   Liked On: 19-11-2018, 11:21 AM

9. 
   rewa liked post by shooternz On thread : Sizing loaded ammo?

   Sizing them in a standard FL die will stuff the bullet the neck is sized about .005" under bullet diameter, Best solution is to use a Redding body die bumps the shoulder back and sizes the base with...

   Liked On: 19-11-2018, 10:38 AM

10. 
    Moa Hunter liked post by shooternz On thread : Monolithic Projectiles

    Most lead contamination is from shooting at indoor ranges with out ventilation there is lead in the priming compound and lead dust from impact melting lead does not put lead in the air only if it is...

    Liked On: 19-11-2018, 08:18 AM

11. 
    Micky Duck liked post by shooternz On thread : Low power 30-06 loads

    Better to use 125 Sierra 130 Speer HP or Hornady 130 spire point the MI projectiles are little stubby things and not very accurate Tried all those over 50 years ago the proper projectiles work very...

    Liked On: 18-11-2018, 04:33 PM

12. 
    Micky Duck liked post by shooternz On thread : Low power 30-06 loads

    ADI 2206H is the same stuff, H4895 was the original powder loaded in the 30/06, Hodgdon started his business selling surplus 4895 from pulled 30/06 military ammo It has been used in reduced loads...

    Liked On: 18-11-2018, 04:30 PM

13. 
    Micky Duck liked post by shooternz On thread : Low power 30-06 loads

    Google reduced loads 30/06 you'll find tonnes of data, The 30/06 has been loaded with all types of loads since day one the US Army used Gallery loads for training in drill halls at 25yds, It is...

    Liked On: 18-11-2018, 04:30 PM

14. 
    Cordite liked post by shooternz On thread : Monolithic Projectiles

    Most lead contamination is from shooting at indoor ranges with out ventilation there is lead in the priming compound and lead dust from impact melting lead does not put lead in the air only if it is...

    Liked On: 18-11-2018, 02:19 PM

15. 
    Ryan liked post by shooternz On thread : Mauser K98.

    Israelis include, Arabs several million of them live peacefully in Israel, there never was a country called Palestine at the time of the first world war it was part of the Ottoman empire, The Arabs...

    Liked On: 18-11-2018, 12:02 PM

Page 41 of 66 First ... 2728293031323334353637383940414243444546474849505152535455 ... Last

• Jump to page: