shooternz
Member

983 Likes

Page 43 of 66 First ... 2930313233343536373839404142434445464748495051525354555657 ... Last

• Jump to page:

1. 
   Beetroot liked post by shooternz On thread : Reloading 6.5 Grendel Subsonic ?

   If you are serious about subs forget the Grendel no one makes a decent subsonic cast bullet mould in 6.5, you are better off with the 7.62x39 I have a cast hollow point 151 grain that works well in...

   Liked On: 08-11-2018, 02:13 PM

2. 
   chainsaw liked post by shooternz On thread : Sako 75 300 win mag twist rate

   As far as twist rate goes if the 1:11" stabilises the 208 grain in one rifle it will stabilise in all rifles with 1:11" barrels, accuracy is another thing it is down to barrel vibrations, some...

   Liked On: 06-11-2018, 12:16 PM

3. 
   dogmatix liked post by shooternz On thread : Sako 75 300 win mag twist rate

   As far as twist rate goes if the 1:11" stabilises the 208 grain in one rifle it will stabilise in all rifles with 1:11" barrels, accuracy is another thing it is down to barrel vibrations, some...

   Liked On: 06-11-2018, 11:26 AM

4. 
   Pete_D liked post by shooternz On thread : Reloading 6.5 Grendel Subsonic ?

   If you are serious about subs forget the Grendel no one makes a decent subsonic cast bullet mould in 6.5, you are better off with the 7.62x39 I have a cast hollow point 151 grain that works well in...

   Liked On: 06-11-2018, 07:45 AM

5. 
   Cordite liked post by shooternz On thread : Reloading 6.5 Grendel Subsonic ?

   If you are serious about subs forget the Grendel no one makes a decent subsonic cast bullet mould in 6.5, you are better off with the 7.62x39 I have a cast hollow point 151 grain that works well in...

   Liked On: 06-11-2018, 12:43 AM

6. 
   omegaspeedy liked post by shooternz On thread : Reloading .357mag

   The problem I have with Lee pistol dies is the expander it is not a proper expander it only flares the mouth of the case, with lead bullets it scrapes lead off the bullet, The lyman dies are...

   Liked On: 03-11-2018, 10:07 AM

7. 
   omegaspeedy liked post by shooternz On thread : Reloading .357mag

   There are some.357/.38 dies on TM stay away from Lee, I think there is a Lyman 4 die set I can highly recommend them very well made,

   Liked On: 03-11-2018, 12:18 AM

8. 
   Pengy liked post by shooternz On thread : What causes key holing in sub loads

   Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

   Liked On: 30-10-2018, 04:31 PM

9. 
   Micky Duck liked post by shooternz On thread : What causes key holing in sub loads

   Yes they are Hollow point and the lead mix is soft with the lube is good to 2000fps before lead fouling happens they should expand to around .400" at 1050fps, 8.5 of Trail Boss is ok for sub loads, ...

   Liked On: 28-10-2018, 07:18 PM

10. 
    Micky Duck liked post by shooternz On thread : What causes key holing in sub loads

    Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

    Liked On: 28-10-2018, 07:17 PM

11. 
    tikka liked post by shooternz On thread : What causes key holing in sub loads

    Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

    Liked On: 28-10-2018, 06:45 PM

12. 
    Frogfeatures liked post by shooternz On thread : What causes key holing in sub loads

    Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

    Liked On: 28-10-2018, 06:19 PM

13. 
    Sonicjoe liked post by shooternz On thread : What causes key holing in sub loads

    Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

    Liked On: 28-10-2018, 06:06 PM

14. 
    veitnamcam liked post by shooternz On thread : What causes key holing in sub loads

    Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

    Liked On: 28-10-2018, 03:32 PM

15. 
    timattalon liked post by shooternz On thread : What causes key holing in sub loads

    Hi Bill999, You got those 200 grain flat points off me, In theory they should be stabilised with a 1:13" twist at 1050fps, I have two .308s one shoots them the other won't it's just one of the ...

    Liked On: 28-10-2018, 01:53 PM

Page 43 of 66 First ... 2930313233343536373839404142434445464748495051525354555657 ... Last

• Jump to page: