shooternz
Member

911 Likes

Page 6 of 61 First 123456789101112131415161718192056 ... Last

• Jump to page:

1. 
   shooternz liked post by Micky Duck On thread : 30-40 krag load data

   and WHY pray tell us would you want to do that????

   Liked On: 15-08-2022, 12:53 AM

2. 
   shooternz liked post by Bill999 On thread : Subsonic load for 308

   Subs work great if you understand their limitations Set your max distance and don’t compromise Know your trajectory to your max distance Wait for the ideal shot to present My max is 30m and...

   Liked On: 14-08-2022, 12:33 PM

3. 
   shooternz liked post by Bill999 On thread : Roll crimping 308 subs

   8gr of trailboss fills up the case enough that it isnt a problem other options include a bit of packer on top of the powder charge to keep it in place trail boss is easier tho

   Liked On: 10-08-2022, 06:24 PM

4. 
   shooternz liked post by Micky Duck On thread : subs in a saum

   wouldnt be any harder than any other case if you went heavy for calibre and used trailboss...big cases are slightly more problimatic than small ones...but if its just for the odd finishing round,you...

   Liked On: 08-08-2022, 10:53 AM

5. 
   shooternz liked post by Beetroot On thread : Seating depth headache

   Agree with above about measuring to ogive rather than bullet tip. If you are measuring to the tip, try measuring unloaded projectiles, you might find your 5thou of error there. How is accuracy?...

   Liked On: 24-07-2022, 11:53 AM

6. 
   shooternz liked post by Micky Duck On thread : Cast .44 loads

   took some up to fella today to try out.....pretty sure I will hear back within a few days how the preform on ol gruntasaurus's have asked him to keep any projectiles he recovers.....watch this space.

   Liked On: 22-07-2022, 11:28 PM

7. 
   shooternz liked post by 6x47 On thread : primers...what is softest/easiest to ignite???

   Never once had a misfire with CCI 450s and that's with thousands of them

   Liked On: 17-07-2022, 08:28 PM

8. 
   shooternz liked post by dannyb On thread : primers...what is softest/easiest to ignite???

   Might be an issue with the firing pin or spring ? You may have the same issue no matrer what primers you use :(

   Liked On: 17-07-2022, 08:23 PM

9. 
   shooternz liked post by Kelton On thread : Split brass

   Case head separation can be cause by over sizing them

   Liked On: 11-07-2022, 11:16 PM

10. 
    shooternz liked post by Three O'Three On thread : Pistol powders in rifles question

    Also looking at this. It has 26gn of h414 and 24gn of h4895 listed. To my knowledge 2208 having a burn rate in-between the two, one would assume 25g of 2208 would also work? Which I tried with good...

    Liked On: 10-07-2022, 02:38 PM

11. 
    shooternz liked post by The bomb On thread : Cast 151 gr feeding ok in a Tikka ?

    Didn’t feed well in my A7,went to the pointed 170g cast problem solved but not slot of expansion,those 151g open up real well when I single fed them.

    Liked On: 08-07-2022, 03:15 PM

12. 
    shooternz liked post by NewbieZAR On thread : Cast 151 gr feeding ok in a Tikka ?

    I just load them to the crimp ring and then crimp them.

    Liked On: 08-07-2022, 03:14 PM

13. 
    shooternz liked post by Marty Henry On thread : Pistol powders in rifles question

    Page from my 43rd edition lyman book. In their powder equivalents table ADI list AP 70n as being equivalent to unique and 4197 as approximating 2207 so you get the idea. It doesn't need a filler....

    Liked On: 08-07-2022, 03:09 PM

14. 
    shooternz liked post by Micky Duck On thread : 400gr 44magnum loads

    if your current subsonic is already passing through,,upping weight wont help at all....it wont make any bigger hole or transpher anymore energy.... unless you hitting enough bone to slow it down/stop...

    Liked On: 07-07-2022, 09:14 PM

15. 
    shooternz liked post by andyanimal31 On thread : Hornardy micojust seating stem

    I have one and works as it should, it's not a redding comp seater but you probably can't shoot that well to tell the difference! Sent from my SM-A226B using Tapatalk

    Liked On: 29-06-2022, 07:40 PM

Page 6 of 61 First 123456789101112131415161718192056 ... Last

• Jump to page: