shooternz
Member

983 Likes

Page 63 of 66 First ... 13495051525354555657585960616263646566 Last

• Jump to page:

1. 
   Dead is better liked post by shooternz On thread : Field Target Shooting

   Why not take up metallic silhouette all you need is a dial up scope on a .22rf and you're good to go you can use your field air rifle as there is a air rifle course of fire as well Sean started...

   Liked On: 01-06-2016, 11:17 PM

2. 
   P38 liked post by shooternz On thread : Latest Lust of my Life

   Hi Pete, You and Carl should come to a sanctioned HMS shoot at the Tokoroa shooting complex held the third weekend every month winter series starts in June nothing like some serious competition to...

   Liked On: 25-04-2016, 10:51 PM

3. 
   Cyclops liked post by shooternz On thread : What is "ES"

   That's right in my F class rifle a drop of 70fps gives me 1 MOA lower impact point not really a problem in a hunting rifle until out past 500 metres, at short range under 200 metres might not even...

   Liked On: 11-04-2016, 01:16 PM

4. 
   Uplandstalker liked post by shooternz On thread : What is "ES"

   That's right in my F class rifle a drop of 70fps gives me 1 MOA lower impact point not really a problem in a hunting rifle until out past 500 metres, at short range under 200 metres might not even...

   Liked On: 10-04-2016, 01:13 PM

5. 
   Maca49 liked post by shooternz On thread : Mail order firearm loophole??????????

   Yes I have done that I sold a rifle to a chap in Christchurch he emailed a scan of his license I rang Wellington and checked with the FO there his License was valid I still got him to send the...

   Liked On: 19-03-2016, 10:35 PM

6. 
   Kscott liked post by shooternz On thread : Mail order firearm loophole??????????

   Yes I have done that I sold a rifle to a chap in Christchurch he emailed a scan of his license I rang Wellington and checked with the FO there his License was valid I still got him to send the...

   Liked On: 19-03-2016, 05:16 PM

7. 
   Savage1 liked post by shooternz On thread : What's wrong with this picture...

   He's pointing it at the sort of bird, shotgun shooters are a bit thick at the best of times

   Liked On: 15-02-2016, 01:31 PM

8. 
   DAF liked post by shooternz On thread : Marlin lever action centre fire rifle production?????

   Don't know if they are still in production but the 450 Marlin is an orphan it never took off in the US I know of one here, the cases are out of production you may find some ammo if you search the...

   Liked On: 12-02-2016, 07:25 PM

9. 
   zimmer liked post by shooternz On thread : Cast reload question

   The nose measures .301" the bore .300" it would not be a bore rider if it did not touch the barrel.

   Liked On: 19-01-2016, 07:29 AM

10. 
    300CALMAN liked post by shooternz On thread : Cast reload question

    Don't worry about it the bullet is designed as a bore rider the bullet nose is to long and unsupported so if it didn't ride the bore it would slump when fired, if it chambers without forcing it not a...

    Liked On: 18-01-2016, 10:24 PM

11. 
    P38 liked post by shooternz On thread : Cast reload question

    Don't worry about it the bullet is designed as a bore rider the bullet nose is to long and unsupported so if it didn't ride the bore it would slump when fired, if it chambers without forcing it not a...

    Liked On: 18-01-2016, 06:22 PM

12. 
    kidmac42 liked post by shooternz On thread : Cast reload question

    Don't worry about it the bullet is designed as a bore rider the bullet nose is to long and unsupported so if it didn't ride the bore it would slump when fired, if it chambers without forcing it not a...

    Liked On: 18-01-2016, 05:34 PM

13. 
    steven liked post by shooternz On thread : 303 loads

    Hornady manual lists 38.9 gr max 2206H and 40.8 gr max 2208 COL 2.992" work up from 10% below should be ok, best accuracy is usually 1.5 -2.0 grains below max. Cheers

    Liked On: 26-11-2015, 10:50 AM

14. 
    HNTMAD liked post by shooternz On thread : load development while fire forming

    If you are loading a standard case for a hunting rifle just load them and go hunting , if starting from scratch with new projectiles and powder do your standard work up procedure when you get the...

    Liked On: 19-11-2015, 07:14 AM

15. 
    stumpy liked post by shooternz On thread : 9mm Luger Load Data with IMR X700 Powder?

    It works ok I load it in 9mm .357 and .45 acp, just start a little low and work up it's pretty quick burning so take it in small steps, I don't use those projectiles so can help with data, I started...

    Liked On: 14-11-2015, 06:45 AM

Page 63 of 66 First ... 13495051525354555657585960616263646566 Last

• Jump to page: