SimpleHunter12
Member

13 Likes

1. 
   SimpleHunter12 liked post by Moutere On thread : Trying to Wrap my head around it.

   Sorry my break down above worfts between between Mrad and 0.1 Mrad but you get/the idea and I can’t now edit it to correct the post.

   Liked On: 30-03-2025, 09:49 AM

2. 
   SimpleHunter12 liked post by Moutere On thread : Trying to Wrap my head around it.

   Keep it simple. Don’t think of your adjustments as clicks, they’re 0.1 Mrad. The simplicity of Mrad is the adjustment is 1000th of any distance the distance to the target ie 1cm 100m, 3cm 300m, 1m...

   Liked On: 30-03-2025, 09:48 AM

3. 
   SimpleHunter12 liked post by blip On thread : Trying to Wrap my head around it.

   The other thing about sighting in your rifle before you adjust too much is firstly will your rifle shoot and acceptable group. Thats the first thing I check with a new to me rifle. If it doesnt youll...

   Liked On: 30-03-2025, 09:47 AM

4. 
   SimpleHunter12 liked post by longshot On thread : Trying to Wrap my head around it.

   JD that is easily the funniest thing I have seen on here this year. SimpleHunter12 even though this is funny, it’s funny because it’s true. Inside of 250, all you have to do is aim directly. As...

   Liked On: 30-03-2025, 09:47 AM

5. 
   SimpleHunter12 liked post by No.3 On thread : Trying to Wrap my head around it.

   Everyone else has covered your question - just wanted to add something with the Win ammo I found a little while back. I ended up at the range on an unusually cold day for us, wind chill under zero...

   Liked On: 30-03-2025, 09:47 AM

6. 
   SimpleHunter12 liked post by SmokeyJason On thread : Trying to Wrap my head around it.

   Took the words out of my mouth(meatloaf)

   Liked On: 30-03-2025, 09:46 AM

7. 
   SimpleHunter12 liked post by Tentman On thread : Trying to Wrap my head around it.

   JD has missed his true calling, should have been a comic artist!

   Liked On: 30-03-2025, 09:46 AM

8. 
   SimpleHunter12 liked post by Barry the hunter On thread : Trying to Wrap my head around it.

   deer thats an Australian kanga goat cross called a kangabaaaa very rare indeed and likely protected

   Liked On: 30-03-2025, 09:46 AM

9. 
   SimpleHunter12 liked post by John Duxbury On thread : Trying to Wrap my head around it.

   What Marty Henry said. If you are seeing deer within 200 metres then you dont need to know any of that stuff. Just sight your rifle in so it groups 2.5 - 3 inches high at 100 metres, and then shoot a...

   Liked On: 30-03-2025, 09:45 AM

10. 
    SimpleHunter12 liked post by Marty Henry On thread : Trying to Wrap my head around it.

    What timattalon has said is the old rule of 3 or "maximum points blank range" from back when people didn't have rangefinders and scopes weren't all twiddly dials. You set your scope so at 100 yards...

    Liked On: 29-03-2025, 10:30 AM

11. 
    SimpleHunter12 liked post by timattalon On thread : Trying to Wrap my head around it.

    If you are shooting at deer, and you are shooting out to 300m with a 308, I would sight it in at 25mm to 40mm high at 100m. It will be about zero mm high at 200m and maybe 50mm to 75mm low at 300....

    Liked On: 29-03-2025, 10:30 AM

12. 
    SimpleHunter12 liked post by Jaco Goosen On thread : Trying to Wrap my head around it.

    Hey SH. Youve got a great scope there. 1 click = 0.1 mil means that when shooting at 100 meters, every click up ( or down) will cause your point of impact to move 10mm. 1 click at 100m = 10mm...

    Liked On: 29-03-2025, 10:30 AM

13. 
    SimpleHunter12 liked post by inglishill On thread : Trying to Wrap my head around it.

    1 MRAD is 10 cm @ 100 mtrs, So 0.1 MRAD is 1cm (10mm) @ 100 mtrs. Sight your rifle in so it is bang on @ 100 mtrs. There will (or should) be a dope chart for bullet drop on you packet of...

    Liked On: 29-03-2025, 10:30 AM