SixtyTen
Member

556 Likes

Page 1 of 38 123456789101112131415 ... Last

• Jump to page:

1. 
   40mm liked post by SixtyTen On thread : Quick change tool post, advice please

   Unfortunately not, I sold all of them with the lathe to someone on the forum. Was a great deal for them. I'm now running a 1100kg precision lathe and have a multi-fix QCTP. The multi-fix is handy...

   Liked On: Yesterday, 10:10 PM

2. 
   40mm liked post by SixtyTen On thread : Quick change tool post, advice please

   The stuff from machinery house is literally the same chinese stuff you get on Ebay and Ali, down to the same packaging and everything. machinery house just charges 10x as much. Im all for supporting...

   Liked On: 30-03-2025, 09:58 PM

3. 
   m101a1 liked post by SixtyTen On thread : Quick change tool post, advice please

   The stuff from machinery house is literally the same chinese stuff you get on Ebay and Ali, down to the same packaging and everything. machinery house just charges 10x as much. Im all for supporting...

   Liked On: 28-03-2025, 07:48 PM

4. 
   No good names left liked post by SixtyTen On thread : Quick change tool post, advice please

   The stuff from machinery house is literally the same chinese stuff you get on Ebay and Ali, down to the same packaging and everything. machinery house just charges 10x as much. Im all for supporting...

   Liked On: 28-03-2025, 07:31 PM

5. 
   Fssprecision liked post by SixtyTen On thread : Quick change tool post, advice please

   The stuff from machinery house is literally the same chinese stuff you get on Ebay and Ali, down to the same packaging and everything. machinery house just charges 10x as much. Im all for supporting...

   Liked On: 28-03-2025, 07:04 PM

6. 
   AMOSK93 liked post by SixtyTen On thread : 2 Barrels, 1 Rifle

   Im now setup in Papakura, can do drop off/pickup outside business hours. Feel free to PM me or email at BlackstrandNZ@gmail.com. Doing most types of work other than stock making and hot bluing.

   Liked On: 21-03-2025, 09:15 AM

7. 
   AMOSK93 liked post by SixtyTen On thread : 2 Barrels, 1 Rifle

   No need to overcomplicate this. You wouldn't even need a full blast barrel vice and action wrench if you get a gunsmith to pull the tikka barrel the first time (I am in Papakura and can do this for...

   Liked On: 21-03-2025, 09:14 AM

8. 
   300CALMAN liked post by SixtyTen On thread : 3D printed 22lr suppressor

   PLA will still be fine for around 1.8mm wall thickness, its a bit less heat tolerant than ABS or other high temp filaments. Carbon is just an additive to the plastic filament, offers a small increase...

   Liked On: 17-03-2025, 01:53 PM

9. 
   300CALMAN liked post by SixtyTen On thread : 3D printed 22lr suppressor

   Looks like an interesting design. It would be interesting to meter that against a more traditional baffle stack and see if its any better. I have found a wall thickness of 1.5mm when printing with...

   Liked On: 17-03-2025, 01:51 PM

10. 
    Tuidog liked post by SixtyTen On thread : 2 Barrels, 1 Rifle

    No need to overcomplicate this. You wouldn't even need a full blast barrel vice and action wrench if you get a gunsmith to pull the tikka barrel the first time (I am in Papakura and can do this for...

    Liked On: 17-03-2025, 09:26 AM

11. 
    quentin liked post by SixtyTen On thread : 3D printed 22lr suppressor

    PLA will still be fine for around 1.8mm wall thickness, its a bit less heat tolerant than ABS or other high temp filaments. Carbon is just an additive to the plastic filament, offers a small increase...

    Liked On: 13-03-2025, 02:16 PM

12. 
    308 liked post by SixtyTen On thread : 3D printed 22lr suppressor

    Looks like an interesting design. It would be interesting to meter that against a more traditional baffle stack and see if its any better. I have found a wall thickness of 1.5mm when printing with...

    Liked On: 12-03-2025, 08:38 AM

13. 
    takbok liked post by SixtyTen On thread : 3D printed 22lr suppressor

    Looks like an interesting design. It would be interesting to meter that against a more traditional baffle stack and see if its any better. I have found a wall thickness of 1.5mm when printing with...

    Liked On: 12-03-2025, 06:57 AM

14. 
    Deanohit liked post by SixtyTen On thread : 3D printed 22lr suppressor

    Looks like an interesting design. It would be interesting to meter that against a more traditional baffle stack and see if its any better. I have found a wall thickness of 1.5mm when printing with...

    Liked On: 11-03-2025, 08:02 PM

15. 
    rugerman liked post by SixtyTen On thread : 3D printed 22lr suppressor

    Looks like an interesting design. It would be interesting to meter that against a more traditional baffle stack and see if its any better. I have found a wall thickness of 1.5mm when printing with...

    Liked On: 11-03-2025, 06:53 PM

Page 1 of 38 123456789101112131415 ... Last

• Jump to page: