SixtyTen
Member

562 Likes

Page 3 of 38 First 1234567891011121314151617 ... Last

• Jump to page:

1. 
   Bobba liked post by SixtyTen On thread : 22lr Practicle rifle setup

   If you want to shoot bolt guns, you can't go past an off the shelf Tikka T1X or a CZ457. Both are excellent with good mags and parts support. For scopes, it depends on what your wanting to do, but...

   Liked On: 17-01-2025, 10:28 AM

2. 
   Gillie liked post by SixtyTen On thread : 22lr Practicle rifle setup

   If you want to shoot bolt guns, you can't go past an off the shelf Tikka T1X or a CZ457. Both are excellent with good mags and parts support. For scopes, it depends on what your wanting to do, but...

   Liked On: 17-01-2025, 10:26 AM

3. 
   Gillie liked post by SixtyTen On thread : 22lr Practicle rifle setup

   Hit up the guys on the SPARC facebook page about using one of the loaner rifles and come along to a match. They are good guns that are setup well with data, and you will be put in a squad with folks...

   Liked On: 17-01-2025, 10:23 AM

4. 
   gundoc liked post by SixtyTen On thread : Building a test fire tube / bullet trap

   Made a start today. I picked up 1.2m of 200x200x9 square hollow section plus had the steel shop plasma cut a 20mm plate for the bottom. I fired up the arc welder and glued the plate to the bottom of...

   Liked On: 08-01-2025, 04:26 PM

5. 
   Ross Nolan liked post by SixtyTen On thread : Building a test fire tube / bullet trap

   I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...

   Liked On: 08-01-2025, 02:40 PM

6. 
   Micky Duck liked post by SixtyTen On thread : Building a test fire tube / bullet trap

   I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...

   Liked On: 08-01-2025, 12:56 PM

7. 
   Micky Duck liked post by SixtyTen On thread : Building a test fire tube / bullet trap

   Made a start today. I picked up 1.2m of 200x200x9 square hollow section plus had the steel shop plasma cut a 20mm plate for the bottom. I fired up the arc welder and glued the plate to the bottom of...

   Liked On: 08-01-2025, 12:55 PM

8. 
   timattalon liked post by SixtyTen On thread : Building a test fire tube / bullet trap

   I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...

   Liked On: 07-01-2025, 11:22 PM

9. 
   Joe_90 liked post by SixtyTen On thread : Building a test fire tube / bullet trap

   I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...

   Liked On: 07-01-2025, 09:11 PM

10. 
    308 liked post by SixtyTen On thread : Building a test fire tube / bullet trap

    I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...

    Liked On: 07-01-2025, 08:48 PM

11. 
    Joe_90 liked post by SixtyTen On thread : Building a test fire tube / bullet trap

    Made a start today. I picked up 1.2m of 200x200x9 square hollow section plus had the steel shop plasma cut a 20mm plate for the bottom. I fired up the arc welder and glued the plate to the bottom of...

    Liked On: 06-01-2025, 09:33 PM

12. 
    Dan88 liked post by SixtyTen On thread : Building a test fire tube / bullet trap

    Made a start today. I picked up 1.2m of 200x200x9 square hollow section plus had the steel shop plasma cut a 20mm plate for the bottom. I fired up the arc welder and glued the plate to the bottom of...

    Liked On: 06-01-2025, 08:03 PM

13. 
    Pengy liked post by SixtyTen On thread : Charles Upham memorial Match 18-19 Jan 2025

    The annual Charles Upham Memorial Match is being held at Clevedon Rifle Club in Auckland on the 18th and 19th of January. This is one of New Zealand's oldest sporting trophies, going back to the...

    Liked On: 05-01-2025, 07:15 PM

14. 
    Tentman liked post by SixtyTen On thread : Charles Upham memorial Match 18-19 Jan 2025

    The annual Charles Upham Memorial Match is being held at Clevedon Rifle Club in Auckland on the 18th and 19th of January. This is one of New Zealand's oldest sporting trophies, going back to the...

    Liked On: 05-01-2025, 05:00 PM

15. 
    dogmatix liked post by SixtyTen On thread : Charles Upham memorial Match 18-19 Jan 2025

    The annual Charles Upham Memorial Match is being held at Clevedon Rifle Club in Auckland on the 18th and 19th of January. This is one of New Zealand's oldest sporting trophies, going back to the...

    Liked On: 05-01-2025, 04:55 PM

Page 3 of 38 First 1234567891011121314151617 ... Last

• Jump to page: