SixtyTen
Member

388 Likes

Page 5 of 26 First 12345678910111213141516171819 ... Last

• Jump to page:

1. 
   SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

   I just did these two tests 45-60 50 grains 1 1/2 FG Black powder 350 grain PC Cast lead bullets. 30m from a leaning bench Bottom group was shot first and wiped clean between each shot. So shot...

   Liked On: 26-05-2024, 10:48 PM

2. 
   SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

   Clean cold bore 30m proof of concept shot this evening First shot ever at an animal so happy with the entire project Reload all the cases from todays range session and hunting and go look for...

   Liked On: 26-05-2024, 10:48 PM

3. 
   SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

   Today i put 4 cold bore clean shots on target at various ranges to check bullet drop for hold over. 25 and 50m are perfectly on point of aim and suit my purpose 70m and 95m are easy to hold...

   Liked On: 26-05-2024, 10:48 PM

4. 
   SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

   And the very last task is engrave its caliber and barrel twist. There is nothing else to do apart from taking it hunting 250773

   Liked On: 26-05-2024, 10:48 PM

5. 
   SixtyTen liked post by Fssprecision On thread : Unusual early knife/pistol

   You sure don't see many of these about, this came along this week and needed the old broken nipple removing and a new one making. turned out great and a lovely little piece

   Liked On: 25-05-2024, 08:51 AM

6. 
   SixtyTen liked post by robhughes-games On thread : The lightening project

   Bolt done for one action. Second coming off the mill shortly. Next one is a faster twist. Bolt flute took off 21grams and action cuts was 80. Titanium handle next for another 38. Then it can sit in...

   Liked On: 18-05-2024, 05:56 PM

7. 
   SixtyTen liked post by nickbop On thread : Looking for a Good Shooting Optometrist

   Vision care in Paeroa, owner is a shooter, good service

   Liked On: 15-05-2024, 06:21 PM

8. 
   SixtyTen liked post by Maca49 On thread : Looking for a Good Shooting Optometrist

   I had problems over Covid got ripped by an optician, ended up going to an optician Murray Rogers at the Mount, fixed my problems. Older guy, at 257 Maunganui Road

   Liked On: 12-05-2024, 03:34 PM

9. 
   SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

   So the Vintage Rifle scene has been pretty quiet on the forum lately and it falls to me to stir things up So what happens when that crazy old rifle guy ( old rifle not old guy ? ) buys a SHOTGUN ...

   Liked On: 25-04-2024, 01:44 PM

10. 
    SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    The A&N is in nearly 100% condition externally and definitely 100% mechanically and bore. The stock was a little dull and dirty. But a quick solvent clean and 20 coats of stock oil brought it...

    Liked On: 25-04-2024, 01:44 PM

11. 
    SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    So what use is a mint vintage nitro proofed 16 gauge shotgun ( to a rifle guy ) that only weighs 4 3/4 pounds ? Actually not much ! It came with half a box of Winchester 16 gauge 3/4 oz solid...

    Liked On: 25-04-2024, 01:44 PM

12. 
    SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    Group at 50 yards was under 4" and well low of point of aim 248719

    Liked On: 25-04-2024, 01:44 PM

13. 
    SixtyTen liked post by akaroa1 On thread : Another Vintage project and what happens when .....

    First thing I did in the conversion process is solder on a period correct front sling eye This needs to be done before the liner is fitted an epoxied into the barrel 248723 Now wait for a...

    Liked On: 25-04-2024, 01:44 PM

14. 
    SixtyTen liked post by JBNZ On thread : Tikka T3 Stock Paint job

    Moutere Duramax Granite effect Entire Process: -Light sand 240grit -Wipe down with isopropyl (wore gloves from this point on) -Taped all the inletting, stud holes etc. -3 coats of grey ...

    Liked On: 18-04-2024, 10:13 PM

15. 
    SixtyTen liked post by Von Gruff Knives On thread : A Lee Speed stock

    Maybe these show it better. Afternoon sun though. https://i.imgur.com/I0mUumcl.jpg https://i.imgur.com/8iVI8UUl.jpg

    Liked On: 15-04-2024, 10:41 PM

Page 5 of 26 First 12345678910111213141516171819 ... Last

• Jump to page: