Skeetshooter
Member

43 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   kotuku liked post by Skeetshooter On thread : Expected spread for a full choked 12 gauge @ 30 meters?

   I have several 1100's in my safe and have shot them for years,I'd dispute strongly any theory that says they 'shoot low' Is he wanting to shoot trap with a skeet/field stock? That could explain his...

   Liked On: 23-02-2025, 10:19 PM

2. 
   Micky Duck liked post by Skeetshooter On thread : Expected spread for a full choked 12 gauge @ 30 meters?

   I have several 1100's in my safe and have shot them for years,I'd dispute strongly any theory that says they 'shoot low' Is he wanting to shoot trap with a skeet/field stock? That could explain his...

   Liked On: 23-02-2025, 10:08 PM

3. 
   woods223 liked post by Skeetshooter On thread : Expected spread for a full choked 12 gauge @ 30 meters?

   I have several 1100's in my safe and have shot them for years,I'd dispute strongly any theory that says they 'shoot low' Is he wanting to shoot trap with a skeet/field stock? That could explain his...

   Liked On: 23-02-2025, 09:18 PM

4. 
   Old_School liked post by Skeetshooter On thread : Expected spread for a full choked 12 gauge @ 30 meters?

   I'll add my 2 cents worth, Shotguns don't have a rear sight, the theory is that you face sitting on the stock in the same place every time, with your eye looking down the rib is your rear sight....

   Liked On: 20-02-2025, 10:44 AM

5. 
   schwen liked post by Skeetshooter On thread : Expected spread for a full choked 12 gauge @ 30 meters?

   I'll add my 2 cents worth, Shotguns don't have a rear sight, the theory is that you face sitting on the stock in the same place every time, with your eye looking down the rib is your rear sight....

   Liked On: 20-02-2025, 07:56 AM

6. 
   csmiffy liked post by Skeetshooter On thread : Expected spread for a full choked 12 gauge @ 30 meters?

   I'll add my 2 cents worth, Shotguns don't have a rear sight, the theory is that you face sitting on the stock in the same place every time, with your eye looking down the rib is your rear sight....

   Liked On: 19-02-2025, 04:22 PM

7. 
   Oldbloke liked post by Skeetshooter On thread : Shotgun mod advise

   Is there anybody in nz fitting briely chokes? I stand correction but I think not. Miles gunshop in Australia your only option.ive had to sets of barrels done by briely in Houston.

   Liked On: 30-11-2024, 07:26 AM

8. 
   Micky Duck liked post by Skeetshooter On thread : old ICI .22 ammo

   A little further a little faster, was on there shotgun shells

   Liked On: 26-09-2024, 07:52 PM

9. 
   Bol Tackshin liked post by Skeetshooter On thread : Selling gun triggering event?

   Cheers guys,thank you

   Liked On: 01-05-2024, 05:34 PM

10. 
    JCann liked post by Skeetshooter On thread : Looking for Perazzi barrel

    Perazzi need to get there act together re manufacturing techniques , well know there barrel solderering of ribs needs improvement, other manufacturers are brazing barrels and ribs whilst perrazi...

    Liked On: 30-04-2024, 08:00 PM

11. 
    veitnamcam liked post by Skeetshooter On thread : What Have You Loaded Today

    Forming cases and loading for the .30 badger, Loading 2.2 grns of 700x, 175 grn cast sized to .309. Project rifle nearly finished, waiting for the shops to open tomorrow to buy a 11mm end mill to...

    Liked On: 26-04-2024, 08:06 PM

12. 
    Friwi liked post by Skeetshooter On thread : What Have You Loaded Today

    Unknown at this stage, Aiming for it to be subsonic, From the Lyman cast bullet book that load should be approx 950 fps,that's based on the data for same bullet in 32 20, That 2.2 grns half fills...

    Liked On: 25-04-2024, 11:47 PM

13. 
    akaroa1 liked post by Skeetshooter On thread : What Have You Loaded Today

    Forming cases and loading for the .30 badger, Loading 2.2 grns of 700x, 175 grn cast sized to .309. Project rifle nearly finished, waiting for the shops to open tomorrow to buy a 11mm end mill to...

    Liked On: 25-04-2024, 08:47 PM

14. 
    nightshooter liked post by Skeetshooter On thread : Any vintage ammo experts on here.

    244271244272244273244274

    Liked On: 22-02-2024, 11:05 PM

15. 
    rewa liked post by Skeetshooter On thread : What Have You Loaded Today

    Loading 45acp, going to try a light load of4 grns 700x behind a cast 200 grn semi wadcutter, for approx 750fps. These will be shot from a mod 625 S&W for NRA comp

    Liked On: 22-02-2024, 10:24 PM

Page 1 of 3 123 Last

• Jump to page: