SPEARONZ
Member

401 Likes

Page 5 of 27 First 12345678910111213141516171819 ... Last

• Jump to page:

1. 
   SPEARONZ liked post by ZQLewis On thread : 7mm08 168vld data

   267415 So yes this suggest you are hot. GRT Suggest 41gr of 2208 is about as hot as you should go for an estimated velocit from a 17" barrel is 2436fps. Z

   Liked On: 22-01-2025, 09:16 PM

2. 
   SPEARONZ liked post by grandpamac On thread : 7mm08 168vld data

   Greetings again, Just some notes on measurement of case head expansion to guess pressure. I first saw this mentioned in an article by Bob Hagel in the mid 1980's. The idea is that by measuring the...

   Liked On: 22-01-2025, 07:23 PM

3. 
   SPEARONZ liked post by grandpamac On thread : 7mm08 168vld data

   Greetings SPEARONZ, I have to agree with Puffin In that your loads are dangerously over pressure. You are 2.5 grains over the Hodgdon book max of 40 grains for the similar Sierra 168 grain HPTBT...

   Liked On: 22-01-2025, 09:33 AM

4. 
   SPEARONZ liked post by kiwi303 On thread : Tikka Ace

   I have been running an alpha forefend on the tikkas for match stuff a bit which are also worth looking at. I have a rem 700 model spare if anyone is in need. a billet foreend like a vision or an...

   Liked On: 20-01-2025, 04:48 PM

5. 
   SPEARONZ liked post by Kelton On thread : Is the new 7mm PRC a lemon ?

   18” way to bigger cartridge for it short mag

   Liked On: 20-01-2025, 12:18 PM

6. 
   SPEARONZ liked post by Beetroot On thread : Tikka Ace

   The Whiskey 3 Pro and ACC Elite are both over $3000 in NZ, or atleast the W3P will be. The AT-X AICS chassis is a $3500 NZD chassis and doesn't have a connector bar. Tikka already have a bag rider...

   Liked On: 20-01-2025, 10:42 AM

7. 
   SPEARONZ liked post by whanahuia On thread : Got too be philosophical!

   Daylight this morning saw me on a bit bigger exploratory mission today. I had my pack on and it it an inflatable packraft, paddle, and lifejacket. Fluer trudged along always a bit ahead of me,...

   Liked On: 19-01-2025, 08:11 PM

8. 
   SPEARONZ liked post by whanahuia On thread : Got too be philosophical!

   Since moving south, Ive been concentrating on trying to sus out areas within 30 minutes of home that I can head out and go for a short morning or evening hunt on. There are not that many access...

   Liked On: 19-01-2025, 08:05 PM

9. 
   SPEARONZ liked post by charliehorse On thread : What Have You Loaded Today

   Got a couple wrong though 266914

   Liked On: 13-01-2025, 04:10 PM

10. 
    SPEARONZ liked post by ANTSMAN On thread : Warfighter Commando pants

    None seen- there were 2 dudes ahead of us same area- they had shot 1- 4 pairs binos and thermals going hard=nothing else seen.

    Liked On: 12-01-2025, 06:38 PM

11. 
    SPEARONZ liked post by 30late On thread : my new One Planet sleeping bag

    Yes i nearly bought a -5 Cocoon , only a bit more weight at around 700 grams!! which is still very light.

    Liked On: 11-01-2025, 10:29 PM

12. 
    SPEARONZ liked post by gimp On thread : Let's talk about velocity Extreme Spread (ES)

    The extreme spread (ES) of velocity is a metric that is often referred to by shooters, and particularly handloaders. As a measure, it is a poor choice of a tool for the purposes for which it is used,...

    Liked On: 09-01-2025, 10:00 PM

13. 
    SPEARONZ liked post by Pommy On thread : New 7mm offering by federal

    This is limited by not having the correct cartridges and not knowing what propellants are being used, but the answer to "will it be harder on suppressors" might not be quite so clear cut, based on...

    Liked On: 08-01-2025, 08:31 PM

14. 
    SPEARONZ liked post by Hahn On thread : New 7mm offering by federal

    I'd take another 4 inches of your old rifle. 12 inch barrel throwing those 80eldms at almost 2700fps.

    Liked On: 08-01-2025, 06:42 PM

15. 
    SPEARONZ liked post by Husky1600#2 On thread : GRS bag rider - laminate stock

    Doesnt look like a lot of meat there to give it some strength. I'd be pulling the adjustable butt off and and rebuilding the thick aluminium bit with an integral rail on the bottom and 90 degrees to...

    Liked On: 08-01-2025, 05:33 PM

Page 5 of 27 First 12345678910111213141516171819 ... Last

• Jump to page: