Spitfire
Member

335 Likes

Page 12 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page:

1. 
   Kiwi Greg liked post by Spitfire On thread : Neck turning - School me...

   I neck turn all of my brass when new as I use bushing neck dies. In my .284 and 7 RM I turn down to 14 thou’ thickness on expanded cases, which gives 2 thou’ of neck tension with a .310 bushing in...

   Liked On: 12-04-2020, 01:03 PM

2. 
   Nick-D liked post by Spitfire On thread : Neck turning - School me...

   I neck turn all of my brass when new as I use bushing neck dies. In my .284 and 7 RM I turn down to 14 thou’ thickness on expanded cases, which gives 2 thou’ of neck tension with a .310 bushing in...

   Liked On: 12-04-2020, 11:20 AM

3. 
   ANTSMAN liked post by Spitfire On thread : 150 Eldx in 7mm?

   But my .284 with 162 ELD-X kills them deader ����

   Liked On: 11-04-2020, 11:59 PM

4. 
   Shearer liked post by Spitfire On thread : 150 Eldx in 7mm?

   But my .284 with 162 ELD-X kills them deader ����

   Liked On: 11-04-2020, 07:23 PM

5. 
   G.I_Joel liked post by Spitfire On thread : Do you clean your primer pockets?

   Every time. Lyman hand tool for me. I want to know that my primers are seated to the same depth each time. That’s all I do to clean my brass. I don’t even clean the inside of the necks as I have...

   Liked On: 11-04-2020, 10:52 AM

6. 
   Shearer liked post by Spitfire On thread : Trips planned for when this is all over.....

   I’m starting a new job at the end of July and I’m free until then. If there’s any good in this it’s that I have done @biut 12 months of DIY and land improvements in 3 weeks. I will have earned a...

   Liked On: 10-04-2020, 10:52 AM

7. 
   Bol Tackshin liked post by Spitfire On thread : Walnut Stock Build

   Great work and a stunning piece of wood. Will keep a close eye on progress. What’s happening with the remaining slabs?

   Liked On: 08-04-2020, 11:19 AM

8. 
   Shearer liked post by Spitfire On thread : New experience.

   Well done mate. It’s much, much more difficult than with a rifle, and therefore more rewarding when it all comes together.

   Liked On: 04-04-2020, 12:16 PM

9. 
   Hen liked post by Spitfire On thread : 7mm RM rechambering

   IIRC, brass is made by Hornady and is reputed to be poor quality. It’s a good cartridge in theory but has largely failed to gain traction due to poor brass quality.

   Liked On: 30-03-2020, 07:55 AM

10. 
    Micky Duck liked post by Spitfire On thread : Thank you NZ Hunter!

    Well, there are reports of armed police responding to an incident in the Motueka Valley this morning. Social media says it was hunters, but I don’t know anymore than that. Now, I take social media...

    Liked On: 28-03-2020, 06:28 PM

11. 
    ANOTHERHUNTER liked post by Spitfire On thread : 2020 SHOT STAGS

    Did get a metre kingfish stalking on my 50th birthday last Thursday, though. Sorry that's got nothing to do with the thread - I get confused now I’m officially old!

    Liked On: 25-03-2020, 07:49 AM

12. 
    Micky Duck liked post by Spitfire On thread : 2020 SHOT STAGS

    Did get a metre kingfish stalking on my 50th birthday last Thursday, though. Sorry that's got nothing to do with the thread - I get confused now I’m officially old!

    Liked On: 21-03-2020, 10:17 AM

13. 
    mopheadrob liked post by Spitfire On thread : rifle bedding kit

    I’ve done a few Remingtons and Tikkas with Devcon and it’s great stuff. I hVe also used Nathan Foster’s bedding kit, which worked fine too. A lot of other resins would concern me due to the risk of...

    Liked On: 20-03-2020, 09:12 PM

14. 
    Micky Duck liked post by Spitfire On thread : rifle bedding kit

    I’ve done a few Remingtons and Tikkas with Devcon and it’s great stuff. I hVe also used Nathan Foster’s bedding kit, which worked fine too. A lot of other resins would concern me due to the risk of...

    Liked On: 20-03-2020, 08:31 PM

15. 
    Sideshow liked post by Spitfire On thread : rifle bedding kit

    I’ve done a few Remingtons and Tikkas with Devcon and it’s great stuff. I hVe also used Nathan Foster’s bedding kit, which worked fine too. A lot of other resins would concern me due to the risk of...

    Liked On: 20-03-2020, 08:09 PM

Page 12 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page: