Spitfire
Member

335 Likes

Page 9 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page:

1. 
   Moa Hunter liked post by Spitfire On thread : Today’s F$#k up

   I did that a young soldier. After a long and difficult training exercise we were cleaning machine guns and rifles when I used a 7.62 pull through on a 5.56 rifle (I blame tiredness). I realised what...

   Liked On: 22-06-2020, 10:00 PM

2. 
   Feral liked post by Spitfire On thread : 300 win mag

   77.6 grains of 2217 and 208 ELD-M does 2980 fps in mine. OAL is 3.5, Nosler brass, 215 GMM, 26” barrel, .6 MOA. Found them very easy to tune.

   Liked On: 20-06-2020, 06:51 PM

3. 
   Nick-D liked post by Spitfire On thread : I hate to be the bearer of bad news.

   I have written to my Labour MP asking for clarity on this issue. If it goes ahead, I have informed him that he will not get my vote at the next election. As we have no other form of effective...

   Liked On: 20-06-2020, 06:32 PM

4. 
   Blair liked post by Spitfire On thread : 300 win mag

   77.6 grains of 2217 and 208 ELD-M does 2980 fps in mine. OAL is 3.5, Nosler brass, 215 GMM, 26” barrel, .6 MOA. Found them very easy to tune.

   Liked On: 18-06-2020, 01:11 PM

5. 
   GSP HUNTER liked post by Spitfire On thread : .270 Projectiles Lagging Behind

   Thanks fellas - good points and perspectives. As I said, the .270 offerings lag behind the 6.5s and 7s, but are plenty good enough for most and certainly for me. I just bought a .270, so I’m...

   Liked On: 11-06-2020, 04:07 PM

6. 
   Bol Tackshin liked post by Spitfire On thread : Educate this Canadian

   .......... and light and small as. Unlike the monstrosities I see on a American rifles, most of which have some bloody great camo thing with bungees wrapped around them, for some reason.

   Liked On: 08-06-2020, 07:56 AM

7. 
   Shearer liked post by Spitfire On thread : Help from those with Quickload please.

   You can borrow my Magnetospeed to get you true MV if that’s useful to you. Then you can tinker with BC to match your verified drops.

   Liked On: 05-06-2020, 11:55 AM

8. 
   Edunn liked post by Spitfire On thread : 7mm Rem Mag Troubles

   Sorry - just saw this. I use a patch on an old bronze brush with Autosol soaked in. 20-30 strokes through the throat and a few through the rest of the barrel. I do that after a really good clean...

   Liked On: 04-06-2020, 03:04 PM

9. 
   Moa Hunter liked post by Spitfire On thread : 6.5 prc loads

   RE22 is very temp sensitive too based on .25-06, .30-06 and .300 WM testing when I lived in the US. Temps there (Missouri) ranged from -23 to + 44 in my time, and although I didn’t test at such...

   Liked On: 30-05-2020, 06:10 PM

10. 
    Kiwi Sapper liked post by Spitfire On thread : Duh...............Stupid Boy just primed 60, 308 cartridges with Large Pistol Primers

    At least you did prime them. I once filled 50 cases with powder before realising I hadn’t primed the cases.

    Liked On: 29-05-2020, 08:27 PM

11. 
    Micky Duck liked post by Spitfire On thread : .270 Projectiles Lagging Behind

    Thanks fellas - good points and perspectives. As I said, the .270 offerings lag behind the 6.5s and 7s, but are plenty good enough for most and certainly for me. I just bought a .270, so I’m...

    Liked On: 28-05-2020, 10:41 PM

12. 
    Russian 22. liked post by Spitfire On thread : Duh...............Stupid Boy just primed 60, 308 cartridges with Large Pistol Primers

    At least you did prime them. I once filled 50 cases with powder before realising I hadn’t primed the cases.

    Liked On: 28-05-2020, 10:18 PM

13. 
    Shearer liked post by Spitfire On thread : .270 Projectiles Lagging Behind

    Thanks fellas - good points and perspectives. As I said, the .270 offerings lag behind the 6.5s and 7s, but are plenty good enough for most and certainly for me. I just bought a .270, so I’m...

    Liked On: 28-05-2020, 10:04 PM

14. 
    25 /08 IMP liked post by Spitfire On thread : 7mm rem mag tahr loads

    180 ELD-M in mine with 215 GMM primers and 67 grains of RE26 gives 2840 fps. Mine is throated long to give 91mm (from memory) OAL, so start lower and work up. Some say 180s are too heavy for 7...

    Liked On: 25-05-2020, 09:55 PM

15. 
    Moa Hunter liked post by Spitfire On thread : Euro Mount Tips

    I cut mine in a line just above the teeth which takes the back of the skull off, allowing easy access to get brains out. Use a pressure washer to get bits off while still hot from the boil.

    Liked On: 18-05-2020, 11:45 PM

Page 9 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page: