1st for the evening . . 92 .45LC Rossi 240grn. LEE bullet 208722
Liked On: 25-10-2022, 04:29 PM
Same game, but a little different. Most notable is that I'm not allowed to go alone and what animal I can shoot is strictly controlled. Would have prefered to do it in NZ, but 33 hours flight makes...
Liked On: 24-10-2022, 07:54 AM
Doing a euro mount today. Old bugger had no back teeth. Well the back two molars where all but gone. Still in good nick though. I thought he was around five but I now put him at about eight.
Liked On: 23-10-2022, 12:47 PM
Recoil is massive for me for some reason, I get good results but it makes the preparation harder, zeroing, practice etc. I shot a sika hind at about 400 yards a while back with my mates 6.5x55...
Liked On: 22-10-2022, 08:26 PM
208529208530 Tonight’s effort. Man I now smell like a goat:XD:
Liked On: 21-10-2022, 09:37 AM
I have never slept well in the hills as always uncomfortable. Purchased a neo air some years ago thinking that was the solution, it’s a slippery, narrow bloody thing. Still wins on all accounts for...
Liked On: 19-10-2022, 01:48 PM
1st for the evening .204 Ruger No.1 208240
Liked On: 17-10-2022, 07:06 PM
I have made one main lever screw blank from 4340 and scratch cut a 7/32-40 thread so the button die goes on straight I will make 2 or 3 of these so I can choose the best one when they are hardened...
Liked On: 16-10-2022, 02:21 PM
This from a few weeks back. 208112 208113
Liked On: 16-10-2022, 11:28 AM
2209 and rl16 for me. Better velocities with the rl16
Liked On: 16-10-2022, 10:11 AM
H4350 (2209) & RL16 would the typical powders for 6.5CM, both in the same burn rate bracket. Have had great results with RL16
Liked On: 16-10-2022, 10:10 AM
A few BOP roosters to wrap up the season with the old man and my son. https://uploads.tapatalk-cdn.com/20220828/c9dfd2ef9734cc044c745febce60e432.jpg...
Liked On: 14-10-2022, 03:23 PM
Yes i was going post link to the sale but it's already been taken off, yes has some brass and Ive ordered another 100 new brass. I'll be leaning on Tentman who has one in 218 bee for help.
Liked On: 13-10-2022, 11:31 PM
208037 Steelisreal Just need to get a new butt pad. you can see the hole in the back of the frame for the cleaning rod, I just need to drop out the breech block and trigger one sprung split...
Liked On: 13-10-2022, 11:31 PM
Then after finishing the woodwork deep clean and stock oil Re assembled it all Magnificent does not describe the butt stock walnut And my phone camera doesn't do it full justice It's such a dark...
Liked On: 13-10-2022, 02:54 PM