Steera1
Member

7 Likes

1. 
   308mate liked post by Steera1 On thread : VX-5 2-10 & Bergara Extreme Hunter Mounting

   I think it is a Hi Tec, weight saving probably not worth it to be fair, I just had the stock sitting there so thought it was worth making it fit. Had to ditch the detachable mag and swap to a...

   Liked On: 16-11-2022, 05:01 AM

2. 
   Roarless20 liked post by Steera1 On thread : rifle change / load/ no bumps etc

   Try removing the plastic bush from the rear of the suppressor and shoot some groups, recently traced the lost accuracy of my bergara to the plastic bush being too tight. Used to shoot fine with the...

   Liked On: 05-10-2022, 07:47 PM

3. 
   Larskramer liked post by Steera1 On thread : rifle change / load/ no bumps etc

   That looks much better larskramer, glad I could help. I know mine was only a couple of weeks ago and was very frustrating, tried all sorts but then it came to me while driving to work about how mine...

   Liked On: 05-10-2022, 07:14 AM

4. 
   Jukes liked post by Steera1 On thread : rifle change / load/ no bumps etc

   Try removing the plastic bush from the rear of the suppressor and shoot some groups, recently traced the lost accuracy of my bergara to the plastic bush being too tight. Used to shoot fine with the...

   Liked On: 04-10-2022, 09:45 PM

5. 
   Moa Hunter liked post by Steera1 On thread : rifle change / load/ no bumps etc

   That looks much better larskramer, glad I could help. I know mine was only a couple of weeks ago and was very frustrating, tried all sorts but then it came to me while driving to work about how mine...

   Liked On: 04-10-2022, 09:42 PM

6. 
   dannyb liked post by Steera1 On thread : Maxtoch shooter 2x LED Replacement

   Thanks, that would be great if its not too much hassle, happy to make it worth your time with cash/ beer / prime venison or whatever suits. PM me please

   Liked On: 16-04-2022, 02:23 PM

7. 
   Wirehunt liked post by Steera1 On thread : stoeger 2000 S/A 12g

   Lever to lock it open, button to close the bolt, can be quite a hard push on the button on mine to get it to release properly

   Liked On: 10-06-2019, 09:09 PM