If you are patient a tikka barrel will pop up in the cal you are looking for same thread, screws straight in. Iv changed my 243 sako 75 to 308 for $180 total caliber stamp dosent line up If thats...
Liked On: 25-11-2020, 01:01 PM
must be a lively beast if you need to keep it in a set of yards :)
Liked On: 23-11-2020, 05:42 PM
Surely you need to stuff around with seating, or try some different powder or primers. Might tighten up that group!!!
Liked On: 23-11-2020, 05:19 PM
In those days it was fishermen, wharfies and freezing workers mainly. The smelter was not built until later. Mates and I used to row over to Tiwai in a tin dingy and shoot rabbits as it was nothing...
Liked On: 20-11-2020, 02:16 PM
It was one of those trips where I just felt really good about it and felt like it would produce the goods... finally. Through no lack of effort my mate and myself have been on a few trips now...
Liked On: 20-11-2020, 10:39 AM
T3 solves that simply by changing out the bolt stop and giving it a long mag, single stack feed from the T3 mag solves potential feed issues other actions/feed can create. In this case, the rifle was...
Liked On: 20-11-2020, 10:26 AM
120 NBT @ 3K is a real step up from the .243 - you won't want for more out to 400 yards.
Liked On: 20-11-2020, 10:25 AM
my digital ones are always playing up and at work they only seem to last 2 years. have gone back an old style one's at work, still use a digital one at home for reloading as I struggle to read...
Liked On: 20-11-2020, 10:24 AM
Popped up on trademe yesterday. A friend is picking it up from Tauranga this weekend, so will get some photos then, but here's one from trademe 153950
Liked On: 19-11-2020, 08:34 AM
I was running 2217 in my 20" getting 2800 from 130grn Nosler some years back then I sold it. I can get the same speed from a 18" and 20" .260 with less powder so that's the way I went. Sent from...
Liked On: 19-11-2020, 06:51 AM
I haven't considered that all I know is it doesnt take any more room than ADI. Funny shiny looking stuff it is and very fine
Liked On: 19-11-2020, 06:51 AM
Superformance would balance spot on with the case capacity
Liked On: 19-11-2020, 06:27 AM
I run 55 gr of 2217 behind a 143 eldx and get 2850 out of a 24 inch barrel. Did run 58 gr of 2225 for a while and pushed 140 Berger’s close to 3000.
Liked On: 19-11-2020, 06:27 AM
Horsepower is not everything you know. I've had some of these machines speed past me at well over my safe travelling speed of 85kmh. Most have the highly modified unbaffled engines too and one can...
Liked On: 17-11-2020, 01:40 PM
What's a "stage 1 kit" does that get you up to 45hp?
Liked On: 17-11-2020, 01:29 PM