Ok, so just my two cents. I have been using an Eaglehawk knives talon exclusively for the last three years. Its a steel handle which accepts any number 4 scalpel blade. I have had two iterations,...
Liked On: 28-09-2021, 09:05 PM
Hi Stocky, I got the weight down to 500g on this one, it wasn't such a big deal now that I have done the featherweight build. 650g finished would be nice on this build... this one is more about...
Liked On: 23-09-2021, 10:16 AM
While much of this is accurate I'm not sure about point 3. Longer barrelled rifles experience less recoil simply because they are heavier. Recoil is Newton's Third Law of Motion - the 'action' of...
Liked On: 20-09-2021, 02:07 AM
It's 2021 - what on earth is anyone doing on the internet without a decent ad blocker?
Liked On: 17-09-2021, 03:40 PM
Greetings Bumblefoot, I would definitely hang on to those FL dies. With them you only need to find someone with a press. FL sizing for a .303 takes some care. You only want to size the case just...
Liked On: 17-09-2021, 10:52 AM
+1 and also try and number each individual shot 1, 2, 3, 4 etc. on the target if possible
Liked On: 16-09-2021, 06:35 PM
Have you watched the shows that are funded? Bunch of Muppets chasing animals around farms, missing/wounding game or having some chased by helicopters until they are physically exhausted then the host...
Liked On: 16-09-2021, 03:33 PM
The repellant is dried blood powder. It is very easy to add to the grain mix before the meal goes through the pelleter. Just the same as adding a couple of bags of APR or Dairy / stud, mineral mix. ...
Liked On: 14-09-2021, 11:41 AM
Owning a savage is bad enough
Liked On: 13-09-2021, 07:29 PM
The two 280 cases on the left in last pic look to have ejector stamp marks to my eyes.
Liked On: 13-09-2021, 06:40 PM
Spudattack I have not hunted there but l have been there probably a dozen times since they kicked off in the early 90's ,as someone who has guided the best thing anyone in your situation can do is...
Liked On: 13-09-2021, 01:44 PM
Nice going with the load development all sounds very promising. I also have two kimbers a 280ai and a 6.5 CM. I recently had the 6.5 shortened from 22 inches down to 16 inches. I had been running...
Liked On: 13-09-2021, 01:24 PM
I wouldn't expect the same load to shoot well after a chop. I subscribe to the OBT method and the goalposts are moved when you shorten the barrel. That's not to say you won't get lucky or find that...
Liked On: 13-09-2021, 01:23 PM
At “ normal “ flow crossing is not difficult, but can change quickly with rain in the hills. As above it’s best to not leave a vehicle in the public parks, there are endless tales of break ins. I...
Liked On: 11-09-2021, 12:18 PM
178155 Getting ready for final bedding
Liked On: 09-09-2021, 11:52 PM