More elevation correction available on 30mm as mentioned and usually heavier too. Sometimes a larger/wider eyebox view as well with 30mm. No advantage over a 1" for light gathering.
Liked On: 18-08-2018, 12:52 PM
270wsm with 150gr LRAB for comparison 90171
Liked On: 17-08-2018, 07:28 PM
You can take meat off a bolt face but you cant add to it so good luck rebarelling any a7 to 223..
Liked On: 15-08-2018, 08:55 PM
Deers metabolism slows down in winter to cope with the lack of quality feed and they tend not to move around as much to conserve body weight/energy so just because you aren't seeing them doesn't mean...
Liked On: 13-08-2018, 05:39 PM
I’ve been up behind Avoca Homestead a few times in the winter and never been disappointed. All depends on the river level for the crossing at the homestead... see below. Two roar hunts, two stags,...
Liked On: 10-08-2018, 09:31 PM
Are you sure about that? I've read multiple accounts of people in the US sending off finished rifle barrels for salt-bath nitriding (specifically ferritic nitrocarburizing according to Google), or...
Liked On: 09-08-2018, 10:34 AM
And next to nothing left over for a mount and scope
Liked On: 07-08-2018, 11:33 PM
A Blaser K95 is a fabulous rifle, but unfortunately a 6 month order.
Liked On: 07-08-2018, 11:21 PM
Well done if you can pull that one off.
Liked On: 07-08-2018, 11:17 PM
Why not a custom rifle. I'm sure Greg could rustle up a nice walnut stock and a good barrel and action. Sent from my TA-1024 using Tapatalk
Liked On: 07-08-2018, 08:58 PM
Ok I don't understand then... with the dial off there is no zero stop
Liked On: 05-08-2018, 02:32 PM
I have never had to re zero a rifle after taking it out of the stockand I take mine out heaps, the scope is attached to the rifle not the stock, do them up firm and job done
Liked On: 25-07-2018, 10:05 PM
They have a habit of exploding
Liked On: 25-07-2018, 07:12 PM
Mates got one... Misses everything really well. .308 should be easy but it aint
Liked On: 17-07-2018, 11:36 AM
Superformance. Went up to 58 grains but started to get extractor marks on the brass. I would definitely say 57gr is max in my rifle.
Liked On: 11-07-2018, 10:31 PM