Tankd
Member

203 Likes

Page 6 of 14 First 1234567891011121314 Last

• Jump to page:

1. 
   Varmit Hunter liked post by Tankd On thread : Length of a rifle with welded on suppressor?

   Permanently putting a Suppressor to the end of a barrel is not necessarily the best idea. The suppressor ends up being the perfect breeding ground or moisture and combined with powder etc residue...

   Liked On: 19-01-2021, 08:00 PM

2. 
   Phil_H liked post by Tankd On thread : New .270 cal cartridge from Winchester

   You're funny

   Liked On: 30-12-2020, 09:07 PM

3. 
   hamish9701 liked post by Tankd On thread : BRNO .243 preferred ammo

   For a BRNO with a 1-10 twist i would try what you like up to 100gr flat base , as the twist rate does not like the Boat tail 100gr+ as a general rule.

   Liked On: 19-12-2020, 01:52 PM

4. 
   veitnamcam liked post by Tankd On thread : Savage Axis issues

   One way to test to see if the ammunition you are using is undersize for your chamber is to put a piece of sellotape or electrical tape ( electrical tape is a little excessive) on the base, ideally a...

   Liked On: 15-11-2020, 07:36 PM

5. 
   Moa Hunter liked post by Tankd On thread : Savage Axis issues

   One way to test to see if the ammunition you are using is undersize for your chamber is to put a piece of sellotape or electrical tape ( electrical tape is a little excessive) on the base, ideally a...

   Liked On: 15-11-2020, 06:38 PM

6. 
   R93 liked post by Tankd On thread : Savage Axis issues

   One way to test to see if the ammunition you are using is undersize for your chamber is to put a piece of sellotape or electrical tape ( electrical tape is a little excessive) on the base, ideally a...

   Liked On: 15-11-2020, 06:22 PM

7. 
   caberslash liked post by Tankd On thread : Nathan Foster

   Annealing any Projectile is just crazy . Lead melts at 330 Celsius and Copper anneals at 400 Celsius. I cannot imagine what that means .

   Liked On: 11-09-2020, 12:49 AM

8. 
   outlander liked post by Tankd On thread : NZ Wide Ammunition Shortage??

   To understand what is happening you have to understand what is happening . There is a perfect storm of Covid 19/Riots/BLM/Antifa/ Proud Boys ect and an election the media is trying to paint as a...

   Liked On: 10-09-2020, 11:22 AM

9. 
   kukuwai liked post by Tankd On thread : NZ Wide Ammunition Shortage??

   To understand what is happening you have to understand what is happening . There is a perfect storm of Covid 19/Riots/BLM/Antifa/ Proud Boys ect and an election the media is trying to paint as a...

   Liked On: 09-09-2020, 08:39 PM

10. 
    Hunterdave liked post by Tankd On thread : Tippmann m4 22

    I have an M4 Elite , I have tried the S&W MP 22 and also Kriss Defiance . The Kriss 's balance was to far forward for me so I didn't like it . The S&W MP22 has a nice balance but just feels to light...

    Liked On: 06-09-2020, 03:15 PM

11. 
    Cordite liked post by Tankd On thread : Advice on semi auto rimfire for goats

    A 22 mag will do the job , close up ( within 50m) shoulder/chest shots work and further out neck shots . Head shots are problematic because of size/movement . The thing to remember is when a goat is...

    Liked On: 25-08-2020, 11:47 PM

12. 
    10-Ring liked post by Tankd On thread : 22 Bedding - Anschutz

    Bedding is unlikely to give you what you are after , you're results are not shabby . The most problematic part of 22 shooting is the ammunition and consistency is the key , sorting the ammunition...

    Liked On: 12-08-2020, 11:22 AM

13. 
    Moa Hunter liked post by Tankd On thread : Scope running out of elevation adjustment (Shooting too high)

    There will be some problem with the Internals , check to see if you have the full range of adjustment . Is this a new scope to you , and how did it work previously ?. One option if you are not...

    Liked On: 12-08-2020, 12:30 AM

14. 
    Ground Control liked post by Tankd On thread : 22 Bedding - Anschutz

    Bedding is unlikely to give you what you are after , you're results are not shabby . The most problematic part of 22 shooting is the ammunition and consistency is the key , sorting the ammunition...

    Liked On: 10-08-2020, 09:55 PM

15. 
    Andrew11 liked post by Tankd On thread : Reloading 9mm

    For powder choices go to ADI Home - ADI World Class Powders and Ammunition (http://www.adi-powders.com.au/handloaders/index.asp) . For other information , Youtube is a good resource and your other...

    Liked On: 09-08-2020, 04:07 PM

Page 6 of 14 First 1234567891011121314 Last

• Jump to page: