Tech
Member

160 Likes

Page 5 of 11 First 1234567891011 Last

• Jump to page:

1. 
   Tech liked post by Southcity On thread : Show me your knives

   Bruce Merchant Australia. Cleaver & large Camp knife pair I had made. Titanium bolsters and pins, stablished Gidgee. 213554

   Liked On: 03-01-2023, 09:19 PM

2. 
   Tech liked post by Southcity On thread : Show me your knives

   A couple of iconic NZ knife makers The first the late Bill Reddex The second a duo of Bill Nikls 213540 213541 213542

   Liked On: 03-01-2023, 09:19 PM

3. 
   Tech liked post by Southcity On thread : Show me your knives

   While on Puma fixed blades this is the smallest I have�� 213512 213513

   Liked On: 03-01-2023, 09:19 PM

4. 
   Tech liked post by Southcity On thread : Show me your knives

   Sorting through my knives today and thought I would post a few. Here are my fixed blade Pumas. All from 1980/81 except the Hunters companion and the Trappers Companion from the 1960’s) Bowie...

   Liked On: 03-01-2023, 09:19 PM

5. 
   Tech liked post by Ross Nolan On thread : Another lesson under the belt - parallax binding up

   Burris Zee rings with the inserts for the win. Tallys rely on the tapped holes in the receiver being perfectly aligned, AND the holes in the ring mount screws being perfect also. 40 years of...

   Liked On: 27-11-2022, 10:39 AM

6. 
   Tech liked post by Finnwolf On thread : One up the spout

   With me it’s not so much the ‘nano second’, it’s more the noise. And in the bush the shooting ranges are well within hearing distance of the deer.

   Liked On: 06-11-2022, 07:07 PM

7. 
   Tech liked post by FRST On thread : Walnut and blued steel,

   202475 202476

   Liked On: 04-10-2022, 07:48 PM

8. 
   Tech liked post by Moutere On thread : Rifle and Optics Snobs

   This is the mindset I’ve encountered most often, usually leaves me wondering who the snob really is.

   Liked On: 22-09-2022, 09:46 PM

9. 
   Tech liked post by Bagheera On thread : Pull throughs

   Otis make the best commercial pullthrough kits IMHO. 203426

   Liked On: 13-08-2022, 08:28 PM

10. 
    Tech liked post by 6x47 On thread : Pull throughs

    That's my view of pull-throughs: an emergency item for when you get crap down your barrel when away from home. Proper cleaning involves high quality rods.

    Liked On: 13-08-2022, 08:25 PM

11. 
    Tech liked post by omark On thread : Pull throughs

    Buy a Parker hale cleaning rod jag and bronze brush

    Liked On: 13-08-2022, 08:24 PM

12. 
    Tech liked post by SL600 On thread : 17 Hornet

    202084

    Liked On: 24-07-2022, 04:58 PM

13. 
    Tech liked post by Southcity On thread : Spartan bipod

    My cousins has fitted gunsmith type adapters to three of my rifles for me. All in laminated stocks. Wonderful neat solution. Just wish I could use this solution on my three Sauer 202.s. 197993

    Liked On: 29-05-2022, 09:21 PM

14. 
    Tech liked post by Marty Henry On thread : Anyone still using the 220 swift

    Well I have rings and decided a period "correct" vx1 3-9 seeing the rifle was made in 1990. It's a shooter, 3 rounds to zero then 5 into 3/4 in at 100 yds. True to form someone always tries to...

    Liked On: 20-02-2022, 10:04 PM

15. 
    Tech liked post by 6x47 On thread : Bench rest

    Absolutely, a benchrest will take (lack of) steadiness out of the equation. A rolled up jacket over the bonnet doesn't cut it..

    Liked On: 30-10-2021, 04:51 PM

Page 5 of 11 First 1234567891011 Last

• Jump to page: