Three O'Three
Member

55 Likes

Page 4 of 4 First 1234

• Jump to page:

1. 
   Three O'Three liked post by 7mmsaum On thread : 243 varmint projaectiles

   87 g V- Max Or Nosler 95g Ballistic Tip

   Liked On: 11-07-2021, 09:31 PM

2. 
   Three O'Three liked post by veitnamcam On thread : lee collet die issues

   It may also be that your collet is collapsing as far as is possible and not clamping on the mandrel as such and your necks are springing back. Annealing the case necks would be the solution.

   Liked On: 29-06-2021, 07:27 PM

3. 
   Three O'Three liked post by ebf On thread : lee collet die issues

   Sometines the petals on the collets get "stuck", disassemble the die, use some sandpaper on the cone, and give it a light coat of lithium grease.

   Liked On: 29-06-2021, 07:27 PM

4. 
   Three O'Three liked post by Mick Hunter On thread : Shooting ranges in the Waikato

   Email the secretary, she will tell you what to do. jaknjim@gmail.com You do need to attend the site for a one off induction as part of the initial membership. These are done once a month

   Liked On: 25-06-2021, 06:42 PM

5. 
   Three O'Three liked post by keengunNic On thread : federal vs adi bras

   Only once with federal brass, 300wsm, 168amax, rl17 cant particularly remember the amount of powder but it wasnt over stoked, not over pressure on the first firings, second firings was popping the...

   Liked On: 23-06-2021, 10:51 PM

6. 
   Three O'Three liked post by 40mm On thread : bullets mold in NZ

   Keep your eyes peeled for a second hand one. Put a WTB ad in the for sale section too. And finally, check out the auctions, Carvells. Ted rogers. Antique arms. Oh, and trademe.

   Liked On: 23-06-2021, 09:57 PM

7. 
   Three O'Three liked post by Driverman On thread : bullets mold in NZ

   I heard Upper Hutt gun shop had some used ones about a year ago. Worth contacting

   Liked On: 23-06-2021, 09:57 PM

8. 
   Three O'Three liked post by rupert On thread : bullets mold in NZ

   Check out MP Molds: beautiful molds which work very well. https://www.mp-molds.com/product-category/molds/

   Liked On: 23-06-2021, 09:57 PM

9. 
   Three O'Three liked post by shooternz On thread : .303 Cast bullets

   I have only shot 10 of them, selling them so fast i never have any left for myself, A friend says 24.0 grains 2206H is good 2205 or 2207 starting at 20.0 grains should be ok also IMR 3031 at 20.0...

   Liked On: 22-06-2021, 11:40 PM

10. 
    Three O'Three liked post by Micky Duck On thread : scales

    I still use my LEE balance beam scales...got a set of ohau ones but ,yeah nah the lee just as good...if you think they too slow,buy set of lee spoons and owder trickler,or just trickle last bit in...

    Liked On: 21-06-2021, 10:55 PM

Page 4 of 4 First 1234

• Jump to page: