timattalon
Member

4230 Likes

Page 183 of 282 First ... 83133169170171172173174175176177178179180181182183184185186187188189190191192193194195196197233 ... Last

• Jump to page:

1. 
   timattalon liked post by gundoc On thread : Going to fix my CZ stock - help!

   Those type of breaks are fairly common. I like to use Araldite and I drill a few 3mm holes about 4-5mm deep to give a good key in the mating surfaces. It is often a good idea to leave the barreled...

   Liked On: 04-03-2020, 11:51 PM

2. 
   timattalon liked post by Joe_90 On thread : Going to fix my CZ stock - help!

   Good advise from Moa Hunter. I quite like the quick clamps that fuller make. Rubber tips on them and I've found they to give enough pressure for wood gluing. Using bog standard gorrila PVA wood...

   Liked On: 04-03-2020, 08:11 PM

3. 
   timattalon liked post by Andrew46826 On thread : Owner of recovered firearm wanted

   A simple yes or no would have sufficed :D Tahr I hope all is well with you! The long and short of it, I found the firearm in the boot of a vehicle after a vehicle stop. It would be safe to...

   Liked On: 04-03-2020, 09:39 AM

4. 
   timattalon liked post by Boaraxa On thread : Owner of recovered firearm wanted

   I found a ss lever action a few years back it had been left on a log by a locked forest gate so I dropped it off to the local station the bloke behind the counter said if no one claims it I could...

   Liked On: 03-03-2020, 11:21 PM

5. 
   timattalon liked post by Bill999 On thread : Camo tape on suppressor

   I gave a mae suppressor to my nabour that was stainless which was a bit to bright for him he used shrink wrap on it the stuff for big cables It came up so good and professional (we did it...

   Liked On: 28-02-2020, 11:42 PM

6. 
   timattalon liked post by csmiffy On thread : Pump rifle build questions - 375 h&h??

   timattalon yup and I'm sure there would be a lot less of the small calibers and more bigger magnum calibres carried in the nz bush if there was

   Liked On: 28-02-2020, 09:25 AM

7. 
   timattalon liked post by southernman On thread : Pump rifle build questions - 375 h&h??

   Ok, I am in Canada, been here for years, I've had to shoot a predatory black bear, and have been charged by a grizzly, close enough that she broke the tip, on my 9 foot fly rod.( I can smell her...

   Liked On: 27-02-2020, 04:58 PM

8. 
   timattalon liked post by Marty Henry On thread : Pump rifle build questions - 375 h&h??

   I've seen Ian macullums piece on those, one would definitely do the job Logan Robertson is wanting done even there were 3 bears one behind the other.

   Liked On: 27-02-2020, 04:57 PM

9. 
   timattalon liked post by LoganRobertson On thread : Pump rifle build questions - 375 h&h??

   timattalon they seem to be a bit cheaper here, there's a 300 win mag one with a ziess conquest 3-9x40 for 5800 CAD. It might be the go in a few paydays... Maybe I should hold off until the NZ...

   Liked On: 27-02-2020, 09:56 AM

10. 
    timattalon liked post by JohnScarborough1980 On thread : Trying to break the ice

    Hi all! Thank you for welcoming me to your forum. I am not an avid hunter but I am trying to be, I am learning. Why? I want to get closer to my father who IS an avid hunter. No worries, there...

    Liked On: 27-02-2020, 09:37 AM

11. 
    timattalon liked post by 257weatherby On thread : Hunting and fishing .223 ammo

    You bought from them..................

    Liked On: 26-02-2020, 11:12 PM

12. 
    timattalon liked post by Hunty1 On thread : Camo tape on suppressor

    bit of bike inner tube also works.... doubles as a fire lighter if needs must too!

    Liked On: 26-02-2020, 08:16 PM

13. 
    timattalon liked post by gundoc On thread : Shimming scope...

    Shimming the rear ring is OK and will not cause problems. You can cut shims from aluminium drink cans with a pair of scissors. The shim only needs to be at the bottom, about15mm is long enough.

    Liked On: 26-02-2020, 08:08 PM

14. 
    timattalon liked post by Kiwi Sapper On thread : Muppets walk amongst us

    OK, however, ignoring for the moment "your vehicle resident from hell", how do you react when seeing requests on this site from those , "seeking a bolt" for a firearm? Bloody great red flag and...

    Liked On: 25-02-2020, 11:23 PM

15. 
    timattalon liked post by dogmatix On thread : Pump rifle build questions - 375 h&h??

    A double barrelled 375 is easier to find and will suit your kak handed shooting style. I’m left handed, but right eye dominant, so know how you feel.

    Liked On: 25-02-2020, 07:23 PM

Page 183 of 282 First ... 83133169170171172173174175176177178179180181182183184185186187188189190191192193194195196197233 ... Last

• Jump to page: