Seems like this Officer's been put through the System and acquitted. May the same process be afforded to any of us in unfortunate circumstances.
Liked On: 29-02-2016, 12:40 AM
short answer is yes,:cool: esp if its build, on a scaled 20ga frame, and is not overly heavy, if you have never used such a shotgun in the field, once you start you will understand why, they are so...
Liked On: 28-02-2016, 11:45 AM
Just buy my 6.5 and get the ball rolling. Will chuck in a box of 139gn to get you started. Plenty of reloading options if you wish to get into that side of things down the line, from 95gn to 160gn....
Liked On: 24-02-2016, 11:22 PM
If you read the original post he said between 243 and 270 That leaves either 308 or 6.5 I would go the 6.5 for accuracy, reliability and cost/availability of ammo Remember opinions are like...
Liked On: 24-02-2016, 11:20 PM
You could do a lot worse than this Tikka M690 RH 6.5x55SE | Trade Me (http://www.trademe.co.nz/sports/hunting-shooting/rifles/centrefire/auction-1033886021.htm) Maybe a tad more expensive on...
Liked On: 24-02-2016, 04:58 PM
308 is not a "big" or hard kicking caliber. Thousands of kiwi hunters learnt to hunt and shoot with lightened 303 smle with steel or brass butplates. 308 is a fantastic learners caliber,cheap...
Liked On: 24-02-2016, 03:37 PM
That banging sound is your mum knocking on the bedroom door telling you it is time for tea.
Liked On: 14-02-2016, 03:47 AM
Sensitive much?
Liked On: 14-02-2016, 03:47 AM
i think you hit the nail smack dab on the head 7 . . . there isn't money in the little or fiddly jobs and i don't blame GWorks for turning it down or putting it aside for the better paying jobs, its...
Liked On: 14-02-2016, 03:47 AM
They are not subtlety suggesting anything, you surmised due to offence The adjusted quote above is now is closer to correct We cant expect them to do work for us, when its not economically...
Liked On: 14-02-2016, 03:46 AM
No he's suggesting that they are busy enough doing the other work that is more profitable, than farting around doing a small one off job that will not be...
Liked On: 14-02-2016, 03:45 AM
The reason that is good advice is wind drift. Unless you go with a big-capacity fast twist .22 chambering, you will be murdered by wind past 300yds. Any 6mm will walk over a std twist .22-250 in...
Liked On: 10-02-2016, 04:53 PM
Did anyone here go to the trial and hear all the evidence or are we just listening to what the media says. Because we all know how accurate they are with their information.' Besides, jury trials...
Liked On: 05-02-2016, 01:01 AM
They do come up second hand but not often. This is mine its my favourite pump much smoother than any Mossberg. 45244
Liked On: 31-01-2016, 03:45 AM
I forgot , GOOOO MMP
Liked On: 24-01-2016, 04:43 AM