timattalon
Member

4230 Likes

Page 46 of 282 First ... 323334353637383940414243444546474849505152535455565758596096146 ... Last

• Jump to page:

1. 
   timattalon liked post by grandpamac On thread : 6.5x55 accuracy

   Greetings again, There are two groups of causes for hang fires, primer problems and rifle problems. Primers can be old or have very hard cups as some military ammo intended for semi autos. We can't...

   Liked On: 15-01-2024, 04:32 PM

2. 
   timattalon liked post by imaca On thread : 6.5x55 accuracy

   Re the hangfire, get your face away from the action and open the bolt with you hand in front of the bolt. You want your body parts as far away from the bolt and action as possible, so if it does go...

   Liked On: 15-01-2024, 11:17 AM

3. 
   timattalon liked post by Hugh Shields On thread : 6.5x55 accuracy

   Re The round going off as you extracted it.....I thing that's what's called a hang fire!? Which basically means instead of the primer detonating when the fire pin hits it, the primer does a slow...

   Liked On: 15-01-2024, 11:16 AM

4. 
   timattalon liked post by blip On thread : 6.5x55 accuracy

   you'll break the edge off the extractor if you dont load from the magazine. and then you'll have fun trying to find a new one

   Liked On: 15-01-2024, 11:15 AM

5. 
   timattalon liked post by BFA On thread : 6.5x55 accuracy

   Billymavs has the very dies you're after in the buy and sell section for $50, hop into it -

   Liked On: 15-01-2024, 11:15 AM

6. 
   timattalon liked post by zeropak On thread : 6.5x55 accuracy

   If the Handloads are grouping Ok and the factory loads wont hit a cardboard box it feel to me like something else is going on here. I agree handloads can be more accurate than factory ammo but this...

   Liked On: 15-01-2024, 11:14 AM

7. 
   timattalon liked post by Marty Henry On thread : Who got the last laugh? You decide

   Good write up and honest about the misses. You don't mention calibre but I'm picking 708, 308 or similar by the drop you mention. Zeroing at 2 and a half or 3 inches high at 100 should give you...

   Liked On: 15-01-2024, 12:03 AM

8. 
   timattalon liked post by csmiffy On thread : Chaz Forsyth in ODT.

   I doubt very much only 10 mil to establish. You can't rebrand a business for that let alone do a new web system and employees.

   Liked On: 13-01-2024, 04:21 PM

9. 
   timattalon liked post by Rushy On thread : Chaz Forsyth in ODT.

   Eight and a half million is a tad over twenty three grand every day of the year. It would be interesting to understand what share of that the major operating costs of labour, premises rental and IT...

   Liked On: 13-01-2024, 04:21 PM

10. 
    timattalon liked post by flock On thread : Marlin 22, issues!

    Been having issues with my Marlin Papoose (695) same rifle. Love this little set up, weighting in at toy weight, incredibly handy little takedown rifle. The way I have this is set up, I don't lose...

    Liked On: 12-01-2024, 10:59 PM

11. 
    timattalon liked post by Rushy On thread : That hardly seems efficient

    In days gone by if I wanted to get a new pistol I presented at the district firearms office and filled out a permit to procure (now it is “possess”), got the permit and went to the retailer to get...

    Liked On: 12-01-2024, 05:24 PM

12. 
    timattalon liked post by pennyless On thread : Chaz Forsyth in ODT.

    Did I read that right. $500m per year. :wtfsmilie: :pissed off: Well on the way to make Canadas fiasco look reasonable. :fire:

    Liked On: 12-01-2024, 05:15 PM

13. 
    timattalon liked post by Finnwolf On thread : Chaz Forsyth in ODT.

    Good article by Chaz in today’s Otago Daily Times. I just wish law makers would read it and take notice.

    Liked On: 12-01-2024, 05:15 PM

14. 
    timattalon liked post by kukuwai On thread : no hunting today

    Be getting close to +37c in some places over here today so no hunting either. Everyone is in the shade !! Sent from my SM-G950F using Tapatalk

    Liked On: 12-01-2024, 05:14 PM

15. 
    timattalon liked post by Bert 71 On thread : Fit and proper. Be careful

    Due to the standard of driving I have seen, very few police officers are fit and proper to have a drivers license!

    Liked On: 11-01-2024, 06:17 PM

Page 46 of 282 First ... 323334353637383940414243444546474849505152535455565758596096146 ... Last

• Jump to page: