Tommy
Member

4943 Likes

Page 39 of 330 First ... 252627282930313233343536373839404142434445464748495051525389139 ... Last

• Jump to page:

1. 
   Tommy liked post by Markgibsonr25 On thread : Anyone built a mini jetboat? 3m?

   I have a k24 turbo on ethanol in a 3.8m.It is a little more complicated than you make out but k24 is a good choice but depends on what you want in a boat.A $500 dollar motor is a drop in the bucket...

   Liked On: 28-01-2020, 06:56 PM

2. 
   Tommy liked post by Tasbay On thread : Stuck Bullet fix

   Well Dodged a Bullet today, Wanted to try a suppressed load through my 7.62x39 and found some old load data from when I had a Suppressed Norinco Bushranger. Loaded one up the same with powder and...

   Liked On: 26-01-2020, 07:36 PM

3. 
   Tommy liked post by Maca49 On thread : iPhones will not protect you

   Spend a great couple of ours with some complete strangers at the Taupo range today, sighting in my 17hmr, while the other two where wacking a 270 and 6.5. I had a spare iPhone 7 that had caused me...

   Liked On: 26-01-2020, 07:35 PM

4. 
   Tommy liked post by Wingman On thread : 6x45 Rem barrel

   Finally fitted up the last 6mm barrel on the Sako Vixon this afternoon. I had pre machined and chambered the barrel to streamline the process but murphy thew a few curveballs as usual. 128927 ...

   Liked On: 26-01-2020, 03:15 AM

5. 
   Tommy liked post by Wingman On thread : 6x45 Rem barrel

   Mathias that looks great! I figured Id spend a bit of time on this ones stock and tidy it up in general. The metal work is pretty much perfect after a couple of blue touch ups. The stock is a...

   Liked On: 24-01-2020, 06:58 PM

6. 
   Tommy liked post by Gibo On thread : Muppets walk amongst us

   I tell other drivers what I think all the time, usually with a hand gesture :P

   Liked On: 24-01-2020, 10:12 AM

7. 
   Tommy liked post by noboots On thread : Carbon fibre stock options for Howa Mini Action

   Not sure yet but will post when I find out. The tikka stock they make is 675g.

   Liked On: 23-01-2020, 06:35 PM

8. 
   Tommy liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 08:05 PM

9. 
   Tommy liked post by Wingman On thread : 6x45 Rem barrel

   Ok so the Zastava pushed inline. I have made a start on the M85 instead of the Sako as my weekend penciled in for workshop and load development time was sidetracked by a sick wife and kids. They...

   Liked On: 20-01-2020, 06:40 PM

10. 
    Tommy liked post by madmaori On thread : Cooper Discoverer AT3 LT vs Cooper Zeon LTZ

    Don't fix something that aint broken! Nothing at all wrong with the zeon-they really are a great bit of rubber but I would sooner stick with the AT3 as they tend to be a bit more robust and have...

    Liked On: 20-01-2020, 06:35 PM

11. 
    Tommy liked post by johnd On thread : Boerwurst

    Well I must be just a lad then 'cause I'll keep using the skewers. Might be ok for a small coil but these weigh a over kilo each. if you manage to get half it in your tongs you still have a 1/2 of it...

    Liked On: 18-01-2020, 06:48 PM

12. 
    Tommy liked post by veitnamcam On thread : Boerwurst

    The whisky doesnt do so well at putting the fire out ?:D

    Liked On: 18-01-2020, 03:06 PM

13. 
    Tommy liked post by Coote On thread : Reloading Mysteries

    I managed to get to the range today to test some new reloads for my Bergara .357 magnum. I've had a bit of reloading experience, but up until recently I've just followed common recipes. However,...

    Liked On: 17-01-2020, 10:05 PM

14. 
    Tommy liked post by veitnamcam On thread : Case Sizing Dramas

    It is a annoyance of mine that most dies prescribe to set up the FL die as you have described. The problem with those instructions is that they often cause an excessive headspace issue, they give...

    Liked On: 16-01-2020, 09:07 PM

15. 
    Tommy liked post by Wingman On thread : 6x45 Rem barrel

    The Vixen should be a fairly straight forward rebarrel. It has a internal .223 mag with a max COAL of 58.5mm, so the same as my CZ 527 mags. It has a custom carbon fiber Stug stock fitted so as...

    Liked On: 15-01-2020, 09:26 PM

Page 39 of 330 First ... 252627282930313233343536373839404142434445464748495051525389139 ... Last

• Jump to page: