TroyMclean
Member

83 Likes

Page 1 of 6 123456 Last

• Jump to page:

1. 
   TroyMclean liked post by taking_the_gun_for_a_walk On thread : Has anybody fitted atlasworx bottom metal to a tikka themselves

   I also minced a stock trying to put an AICS bottom metal in. Managed to make it fit, but after a few shots the action would lift off the recoil lug, found out when it started spraying shots at the...

   Liked On: 12-01-2025, 08:08 AM

2. 
   TroyMclean liked post by rupert On thread : Has anybody fitted atlasworx bottom metal to a tikka themselves

   I've also done a couple of assemblies of the Atlasworx bottom alloy metal into T3 B&C stocks. Fairly easy. Just go slow and try the fit often. I expect the factory synthetic stock would be much the...

   Liked On: 09-01-2025, 11:12 PM

3. 
   TroyMclean liked post by Tentman On thread : Has anybody fitted atlasworx bottom metal to a tikka themselves

   I've done a couple into synthetic stocks with very basic tools, they work alright but the fit is not the same as factory or what a gunsmith with the "right" gear will achieve.

   Liked On: 09-01-2025, 06:03 PM

4. 
   TroyMclean liked post by NZ32 On thread : Has anybody fitted atlasworx bottom metal to a tikka themselves

   I gave it a go and screwed a stock..... ended up selling the bottom metal

   Liked On: 09-01-2025, 04:21 PM

5. 
   TroyMclean liked post by Southerner223 On thread : Sako lovers

   On a positive note, here's a sako. Brought off the forum awhile ago and have had it shooting 259990

   Liked On: 17-12-2024, 07:05 PM

6. 
   TroyMclean liked post by Nathan F On thread : The birthday rifle

   My 10 year old was given a Tikka M55 in .243 for his birthday back in June. He lives and breathes deer stalking and has shot 6 to date . Fair play to him he doesn't want to shoot " easy farm deer" ....

   Liked On: 16-12-2024, 07:46 PM

7. 
   TroyMclean liked post by Dicko On thread : Factory ammo speed variations

   R22 gives good velocities in the .270. 58.5 gives me close to 3k with the 145 eldx in a 24 inch tube. R22 is a bit hot as temps get over 36C if ammo is in the sun or a hot chamber. But maybe not a NZ...

   Liked On: 02-11-2024, 11:31 AM

8. 
   TroyMclean liked post by Nick.m On thread : Factory ammo speed variations

   Today I took two packets of hornady precision hunter ammo to the range. 1 purchased about 1 month ago (gold primers)and one a couple of days ago (silver primers). The original packet has been...

   Liked On: 01-11-2024, 12:04 PM

9. 
   TroyMclean liked post by NewbieZAR On thread : 223 1:9twist load recommendations for deer

   my old marlin x7 used to shoot 0.8" 10 shot groups with 50gr blitzking and w748

   Liked On: 05-08-2024, 09:21 PM

10. 
    TroyMclean liked post by Kiwi Greg On thread : 223 1:9twist load recommendations for deer

    Flick me a PM or better still an email & I can hook you up

    Liked On: 30-07-2024, 10:32 PM

11. 
    TroyMclean liked post by Kiwi Greg On thread : 223 1:9twist load recommendations for deer

    I have the Sierra 65 Gameking projectiles in stock :)

    Liked On: 30-07-2024, 08:47 PM

12. 
    TroyMclean liked post by Micky Duck On thread : 223 1:9twist load recommendations for deer

    Just re-found n bumped up a couple of older 223 threads. That magic load still works lol

    Liked On: 29-07-2024, 07:51 PM

13. 
    TroyMclean liked post by veitnamcam On thread : 223 1:9twist load recommendations for deer

    65gr game king. 25.5 gr 2206h Consistently shoots 10 shot groups under MOA in my 9 twist Howa mini and works great on deer.

    Liked On: 29-07-2024, 07:50 PM

14. 
    TroyMclean liked post by 7mm Rem Mag On thread : 223 1:9twist load recommendations for deer

    Trademe 500 62gr hornady SP $165

    Liked On: 29-07-2024, 07:50 PM

15. 
    TroyMclean liked post by flock On thread : 223 1:9twist load recommendations for deer

    Shot today shows potential, extreme seating depth, may improve with a bigger jump & a fuller case. 255992 255993

    Liked On: 29-07-2024, 04:31 PM

Page 1 of 6 123456 Last

• Jump to page: