Uplandstalker
Member

814 Likes

Page 16 of 55 First ... 23456789101112131415161718192021222324252627282930 ... Last

• Jump to page:

1. 
   Mathias liked post by Uplandstalker On thread : 6.5 Creed V 7-08

   Hey Gibo - I took a 260Rem Model 7 and poked Mathias 260 30 degree (like a 6.5 CM but about 3mm longer case body) reamer down it. Set the whole thing back an entire neck length in the process. So now...

   Liked On: 31-01-2019, 11:18 AM

2. 
   ebf liked post by Uplandstalker On thread : Firearms on Airplanes

   Travel plenty with firearms. The funniest things is when they say you are checking in a pistol (in a pistol sized case) and they ask if the bolt is removed................ just nold your head and...

   Liked On: 30-01-2019, 03:40 PM

3. 
   seano liked post by Uplandstalker On thread : Production div

   Plenty of people in NZ have these for Production. Shit, some people even make their own too

   Liked On: 28-01-2019, 02:40 PM

4. 
   Banana liked post by Uplandstalker On thread : Glock RMR

   Try TJ at Delta Mike https://deltamike.co.nz/product-category/optics/shield-sights/shield-mounts/

   Liked On: 27-01-2019, 08:30 AM

5. 
   cambo liked post by Uplandstalker On thread : Progressive Press Choice

   I use Lyman spray lube. I lay the cases out on a tea towel or similar, give the lot a light spray and then roll around in the towel. Keep the towel for next time too, don't give it to the wife to...

   Liked On: 23-01-2019, 05:33 PM

6. 
   systolic liked post by Uplandstalker On thread : Progressive Press Choice

   Actually, if only loading one calibre, a Dillon 550C would be OK too.

   Liked On: 20-01-2019, 06:48 PM

7. 
   mikee liked post by Uplandstalker On thread : Progressive Press Choice

   Actually, if only loading one calibre, a Dillon 550C would be OK too.

   Liked On: 20-01-2019, 06:36 PM

8. 
   cambo liked post by Uplandstalker On thread : Progressive Press Choice

   Actually, if only loading one calibre, a Dillon 550C would be OK too.

   Liked On: 20-01-2019, 04:46 PM

9. 
   cambo liked post by Uplandstalker On thread : Progressive Press Choice

   After loading rifle ammo on my Hornady and seeing first had how good the powder thrower is, I would recommend it. If full length sizing (recommended if in a AR of a selection of rifles), at some...

   Liked On: 20-01-2019, 04:45 PM

10. 
    Beaker liked post by Uplandstalker On thread : Progressive Press Choice

    Actually, if only loading one calibre, a Dillon 550C would be OK too.

    Liked On: 20-01-2019, 04:43 PM

11. 
    R93 liked post by Uplandstalker On thread : Hornady Lock n Load press

    I brought one of these last year too. I directly imported it from Natchez in the US. Shipping was near NZ$200, but all up including customs etc was around the NZ$900 mark. Plus Hornady had a...

    Liked On: 15-01-2019, 09:54 AM

12. 
    Mooseman liked post by Uplandstalker On thread : Trail camera pics

    Got a few rabbits in the front yard at home. Have slowly been dealing to them, but put the camera up last night. 43283

    Liked On: 23-11-2018, 07:09 PM

13. 
    piwakawaka liked post by Uplandstalker On thread : Missfired factory ammo

    Will need to ensure the headspace in the rifle is correct before you get to carried away blaming the factory ammo.

    Liked On: 05-08-2018, 11:21 PM

14. 
    Tertle liked post by Uplandstalker On thread : Bulge buster 40SW

    Tertle If you have some brass you need sorted, either I can do it for you or you can borrow my buster

    Liked On: 13-06-2018, 10:25 PM

15. 
    Scouterkotare liked post by Uplandstalker On thread : What do you know about Tisas Zigana for IPSC?

    One of the guys at the club had a Tisas 1911 45ACP on Sunday. Brand new and has already had it re-reamed to be able to fit factory ammo. Racking the slide was like dragging a 2-tonne steel sleed...

    Liked On: 15-05-2018, 07:41 PM

Page 16 of 55 First ... 23456789101112131415161718192021222324252627282930 ... Last

• Jump to page: