I came across this photo today when I was looking through an old album. I believe it is the only photo of Moa bones found in the Tongariro region. 138705
Liked On: 31-03-2021, 03:06 PM
I popped out of my back door to introduce a noisy Possum to my .22, and when I lit the trees up, this wee beauty was sitting 3 metres away 164111
Liked On: 31-03-2021, 03:03 PM
Done for you VC.
Liked On: 31-03-2021, 02:57 PM
Cracked it. The case is being crushed in the seating die. Adjust die as previously mentioned plus trim to correct length and chamfer the inside of the case mouth and all should be well. Your cases...
Liked On: 31-03-2021, 11:34 AM
Greetings Mooseman, It can just be a loose extractor and will vary with the pressure of the loads. For whatever reason the bolt lift is not doing its job of starting the case out of the chamber...
Liked On: 31-03-2021, 09:30 AM
Rain on the roof when youre warm and dry is a pretty good noise as well
Liked On: 31-03-2021, 08:53 AM
that's what i ment by crimp I've had it before from memory i think it was something with the seating die....it was ages ago
Liked On: 30-03-2021, 09:20 PM
Got a plb, yeah, must be more careful with that knife,:thumbsup:
Liked On: 30-03-2021, 09:16 PM
sounds like time for a mesh glove mate....and PLB
Liked On: 30-03-2021, 09:16 PM
Took some days off to chase stags so i decided to have a go at a place i normally dont do very well at. Its a well hunted spot, but its not a easy spot, steep, thick and the animals are hard to...
Liked On: 30-03-2021, 09:16 PM
Ah, the forgotten art of Prussian Blue, aka Engineer's Blue. Who needs a measuring instrument when you have the sharpie trick!
Liked On: 30-03-2021, 08:08 PM
Hi Lars. Im at home in the mornings mate. Have gauges, reamers, annealers, measuring tools and some 30 years of precision reloading knowledge. Im also right on your doorstep(most important of...
Liked On: 30-03-2021, 04:57 PM
The thread is well on it way now so I haven't anything to add except to say I always try my brass in the chamber after full length sizing. Seen the odd hunting mate unable to close the bolt on a...
Liked On: 30-03-2021, 03:59 PM
I had a similar problem with my old 308, Turned out the brass i was given had a larger diameter base. I would start by measuring one piece of brass that chambers and one that doesn't. Draw a...
Liked On: 30-03-2021, 03:37 PM
163962 Finally broken through from the old Hut. Took the window out to make the new opening into the lounge, and put it in the wall on the right of the pic. Using 4 x 1 pallet timber to continue...
Liked On: 30-03-2021, 10:39 AM