veitnamcam
Almost literate.

20843 Likes

Page 90 of 1390 First ... 407677787980818283848586878889909192939495969798991001011021031041401905901090 ... Last

• Jump to page:

1. 
   Gibo liked post by veitnamcam On thread : Case head separation imminent

   Most full length Sizing die instructions tell you to wind the die down to the shell holder and then + another 1/4 or 1/2 turn. This will produce normally brass that should chamber in most rifles of...

   Liked On: 02-11-2022, 01:55 PM

2. 
   dannyb liked post by veitnamcam On thread : Case head separation imminent

   Most full length Sizing die instructions tell you to wind the die down to the shell holder and then + another 1/4 or 1/2 turn. This will produce normally brass that should chamber in most rifles of...

   Liked On: 02-11-2022, 01:33 PM

3. 
   dannyb liked post by veitnamcam On thread : Case head separation imminent

   Case head separation,what to look for and how to avoid it comes up fairly often on here so when prepping some of my "beater brass" today I found one and thought I would section it to show what to...

   Liked On: 02-11-2022, 01:32 PM

4. 
   DickyBird81 liked post by veitnamcam On thread : Hello from Nelson

   Welcome to the forum. Deer are in most places around Nelson including Mt Richmond Forest park Nelson Lakes NP and Kahurangi NP. It is silly spiker time of year as the hinds kick them out of home...

   Liked On: 02-11-2022, 01:17 PM

5. 
   Marty Henry liked post by veitnamcam On thread : Case head separation imminent

   Case head separation,what to look for and how to avoid it comes up fairly often on here so when prepping some of my "beater brass" today I found one and thought I would section it to show what to...

   Liked On: 02-11-2022, 01:07 PM

6. 
   Makros liked post by veitnamcam On thread : Case head separation imminent

   Case head separation,what to look for and how to avoid it comes up fairly often on here so when prepping some of my "beater brass" today I found one and thought I would section it to show what to...

   Liked On: 02-11-2022, 01:05 PM

7. 
   mudgripz liked post by veitnamcam On thread : Landcruiser 4WD in automatic. and a snorkel Question

   Just put into manual mode. Generally low second is good for most obstacles, low first for rock crawling or steep decents. Other than that just let it do its thing...it's automatic.

   Liked On: 02-11-2022, 12:37 PM

8. 
   Mathias liked post by veitnamcam On thread : Landcruiser 4WD in automatic. and a snorkel Question

   Just put into manual mode. Generally low second is good for most obstacles, low first for rock crawling or steep decents. Other than that just let it do its thing...it's automatic.

   Liked On: 02-11-2022, 12:16 PM

9. 
   carlhurley liked post by veitnamcam On thread : Landcruiser 4WD in automatic. and a snorkel Question

   Just put into manual mode. Generally low second is good for most obstacles, low first for rock crawling or steep decents. Other than that just let it do its thing...it's automatic.

   Liked On: 02-11-2022, 11:08 AM

10. 
    rugerman liked post by veitnamcam On thread : Fishing tomorrow!

    I make a habit of scuffing/dragging my feet with the theroy being I will bump one rather than stand right on top of it.....worked today

    Liked On: 02-11-2022, 08:24 AM

11. 
    XR500 liked post by veitnamcam On thread : Fishing tomorrow!

    I make a habit of scuffing/dragging my feet with the theroy being I will bump one rather than stand right on top of it.....worked today

    Liked On: 02-11-2022, 06:59 AM

12. 
    Beaker liked post by veitnamcam On thread : Fishing tomorrow!

    Out with Dad and flounder dog this morning. 209324 Not very low low tides and Dad just in waders limited our options a bit but it was nice and warm and good to be out. Spot one a short drag for 3...

    Liked On: 02-11-2022, 05:51 AM

13. 
    Moa Hunter liked post by veitnamcam On thread : Hi-Tec Composites Carbonfibre stocks?

    Yes nice stocks, yes still in business after Kens untimely death. I went threw Terminator Products to get my latest.....ordered just after... Perhaps going threw a dealer with previous history...

    Liked On: 02-11-2022, 01:42 AM

14. 
    10-Ring liked post by veitnamcam On thread : Hi-Tec Composites Carbonfibre stocks?

    Yes nice stocks, yes still in business after Kens untimely death. I went threw Terminator Products to get my latest.....ordered just after... Perhaps going threw a dealer with previous history...

    Liked On: 01-11-2022, 08:02 PM

15. 
    kukuwai liked post by veitnamcam On thread : Fishing tomorrow!

    I make a habit of scuffing/dragging my feet with the theroy being I will bump one rather than stand right on top of it.....worked today

    Liked On: 01-11-2022, 08:00 PM

Page 90 of 1390 First ... 407677787980818283848586878889909192939495969798991001011021031041401905901090 ... Last

• Jump to page: