About Von Gruff Knives

Basic Information


About Von Gruff Knives
Biography:
Knifemaking has become a passion with huntinf knives in particular but will and have made a great variety on request. Check my website for more detail. http://www.vongruffknives.com/
Location:
south otago
Interests:
making knives, hunting
Occupation:
Retired builder

Statistics


Total Posts
Total Posts
340
Posts Per Day
0.26
General Information
Last Activity
18-03-2025 05:14 PM
Join Date
14-08-2021
Referrals
0

1073 Likes

  1. FRST
    FRST liked post by Von Gruff Knives On thread : A Lee Speed stock
    With that done it is now that the shaping lines are drawn in and for the bottom line I mark round the top of the trigger guard. https://i.imgur.com/rg4YT8Hl.jpg Next I mark in the forestock...
    Liked On: 05-10-2023, 10:50 PM
  2. makka
    makka liked post by Von Gruff Knives On thread : A Lee Speed stock
    With that done it is now that the shaping lines are drawn in and for the bottom line I mark round the top of the trigger guard. https://i.imgur.com/rg4YT8Hl.jpg Next I mark in the forestock...
    Liked On: 05-10-2023, 11:59 AM
  3. CBH Australia
    CBH Australia liked post by Von Gruff Knives On thread : Various Knives
    The start of knife number 1000. A Braai or Barbeque butcher knife with a full flat grind to make easy work of cutting and slicing in the preparation of your meat for the cooking fire. A 9 inch ...
    Liked On: 04-10-2023, 05:50 PM
  4. Friwi
    Friwi liked post by Von Gruff Knives On thread : Various Knives
    The start of knife number 1000. A Braai or Barbeque butcher knife with a full flat grind to make easy work of cutting and slicing in the preparation of your meat for the cooking fire. A 9 inch ...
    Liked On: 04-10-2023, 05:35 PM
  5. norsk
    norsk liked post by Von Gruff Knives On thread : A Lee Speed stock
    With that done it is now that the shaping lines are drawn in and for the bottom line I mark round the top of the trigger guard. https://i.imgur.com/rg4YT8Hl.jpg Next I mark in the forestock...
    Liked On: 03-10-2023, 09:40 PM
  6. Micky Duck
    Micky Duck liked post by Von Gruff Knives On thread : A Lee Speed stock
    With that done it is now that the shaping lines are drawn in and for the bottom line I mark round the top of the trigger guard. https://i.imgur.com/rg4YT8Hl.jpg Next I mark in the forestock...
    Liked On: 03-10-2023, 08:12 PM
  7. csmiffy
    csmiffy liked post by Von Gruff Knives On thread : A Lee Speed stock
    With that done it is now that the shaping lines are drawn in and for the bottom line I mark round the top of the trigger guard. https://i.imgur.com/rg4YT8Hl.jpg Next I mark in the forestock...
    Liked On: 03-10-2023, 06:19 PM
  8. csmiffy
    csmiffy liked post by Von Gruff Knives On thread : A Lee Speed stock
    Time to trim the buffalo horn tip and I find that the fine side of a horse shoe rasp the best for this part of the process and a spacer equal to the height of the teeth above the untoothed end makes...
    Liked On: 03-10-2023, 06:18 PM
  9. Shamus_
    Shamus_ liked post by Von Gruff Knives On thread : A Lee Speed stock
    Time to trim the buffalo horn tip and I find that the fine side of a horse shoe rasp the best for this part of the process and a spacer equal to the height of the teeth above the untoothed end makes...
    Liked On: 03-10-2023, 05:42 PM
  10. Micky Duck
    Micky Duck liked post by Von Gruff Knives On thread : Various Knives
    A Heavy Hunter with exhibition grade Walnut over curve backed buffalo horn on the 1075 blade in a plain pouch sheath. Away to Texas. https://i.imgur.com/rAaqcKsl.jpg
    Liked On: 29-09-2023, 08:46 PM
  11. Micky Duck
    Micky Duck liked post by Von Gruff Knives On thread : A Lee Speed stock
    Time now to do the forend tip so a piece of buffalo horn had the face trued up on the grinder belt and cut to length https://i.imgur.com/1x2NFiyl.jpg This piece is barely big enough but with...
    Liked On: 28-09-2023, 07:10 PM
  12. Micky Duck
    Micky Duck liked post by Von Gruff Knives On thread : A Lee Speed stock
    The big problem with the Lee Enfield action is the back slanting rear of the action Ross so having to inlet with it going forward as it goes down makes for the difficulties. I have done full stock...
    Liked On: 28-09-2023, 07:10 PM
  13. csmiffy
    csmiffy liked post by Von Gruff Knives On thread : A Lee Speed stock
    Time now to do the forend tip so a piece of buffalo horn had the face trued up on the grinder belt and cut to length https://i.imgur.com/1x2NFiyl.jpg This piece is barely big enough but with...
    Liked On: 28-09-2023, 07:02 PM
  14. Shamus_
    Shamus_ liked post by Von Gruff Knives On thread : A Lee Speed stock
    Time now to do the forend tip so a piece of buffalo horn had the face trued up on the grinder belt and cut to length https://i.imgur.com/1x2NFiyl.jpg This piece is barely big enough but with...
    Liked On: 28-09-2023, 03:49 PM
  15. -BW-
    -BW- liked post by Von Gruff Knives On thread : A Lee Speed stock
    Was able to get back to this today and got the mag well sorted for a nice slide fit for both 10 and 5 shot mags https://i.imgur.com/nglElZml.jpg After that was done I did the reinforce across...
    Liked On: 28-09-2023, 12:05 PM

29-07-2024


24-11-2023


21-11-2023


20-10-2023


26-06-2023


11-05-2023


23-10-2022


20-10-2022


15-02-2022


20-01-2022


19-01-2022


24-12-2021


11-12-2021


21-11-2021


07-09-2021


06-09-2021


23-08-2021


No results to display...
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!