A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 25-06-2024, 08:37 AM
Two of the new design Heavy hunters all done. Blades are 5 inch of .170/4.3mm with the first one being a new personal knife with a lovely piece of exhibition grade walnut over CB buffalo horn on the...
Liked On: 24-06-2024, 11:11 AM
This one away to Florida in the morning. A 4x4 Hunter with both the horrozontal sheath (10 degrees down for security) and the standard behind the hip sheath. 4 inch blade of 1084 with curve back...
Liked On: 24-06-2024, 11:08 AM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 19-06-2024, 12:09 PM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 17-06-2024, 09:31 PM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 17-06-2024, 08:34 PM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 17-06-2024, 08:07 PM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 17-06-2024, 06:44 PM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 17-06-2024, 06:16 PM
A while back I had a Savage 20g/22 mag dropped in for a refurbish so after a strip down I reshaped the wrist and grip, added a grip cap, re set the off center butt plate, thinned down the forestock...
Liked On: 17-06-2024, 06:12 PM
Thanks for the comment Boner, but there was no mod to the design. I know the pic on the website may appear to have more upsweep on the blade but the same steel pattern was used for both these and...
Liked On: 24-05-2024, 02:48 PM
Picked up quite a bit of walnut from custom rifle stock blanks on a recent trip away and have spent an afternoon cutting it into knife handle blocks. Majority 60-70mm x 35mm x 130mm with a few at 60...
Liked On: 23-05-2024, 07:45 PM
A Wapiti Hunter for a very big man so had to make the handle a 1/2 in longer than normal to suit his hands. A nice set of spalted Hackberry scales with snake knot lanyard over curve backed buffalo...
Liked On: 23-05-2024, 01:24 PM
Picked up quite a bit of walnut from custom rifle stock blanks on a recent trip away and have spent an afternoon cutting it into knife handle blocks. Majority 60-70mm x 35mm x 130mm with a few at 60...
Liked On: 23-05-2024, 12:37 AM
A General purpose field knife with some of the very nice walnut on the 1084 blade in simply pouch sheath, and a pretty little Bird and Trout knife with Tasmanian Blackwood on the NitroV SS blade in a...
Liked On: 17-05-2024, 02:03 PM