If you're ever unsure of something just refer to this handy guide. :p https://image.ibb.co/fUmsav/qualification_target_doingitwrong.jpg (https://imgbb.com/) I appreciate the write up, (and the...
Liked On: 29-05-2017, 08:25 PM
"It was so fucking sick of hearing about Schapelle Corby it killed itself " -comment I saw this morning
Liked On: 29-05-2017, 08:23 PM
Thanks guys. I appreciate it. Happy to drive to the wairarapa for a look as well as I frequently pop over to SSRNZ for bits and piece. I Will PM you now to chat more. Cheers
Liked On: 28-05-2017, 11:08 PM
Shit it went a way with a big hole in it! The hole must have been on the shady side and not letting much light in :thumbsup:
Liked On: 28-05-2017, 11:07 PM
been a while since I posted anything but heres a short vid of a fellow for the freezer. Took my boy out for a quick mission, 300wm and 210vlds. (have just changed from eldx) Shot a few animals with...
Liked On: 28-05-2017, 11:07 PM
In an earlier post I mentioned my come-ups were accurate to about 700 yds, then past there I was hitting high. So I've just done my version of the tall target test. I "tied" the rifle down to the...
Liked On: 28-05-2017, 07:27 PM
Jeez GM ya wipe glue all over the threaded part, whack the fucker on the barrel and screw it round and round til it gets to the end of the thread then you put a screw driver at right angles through...
Liked On: 28-05-2017, 07:18 PM
Questions 1. What is your budget 2. Do you have GOOD Vodafone or 2Degrees reception 3. Are you computer savvy (fact that you on here is a good start 4. Do you have a "flaring/ignitable" temper...
Liked On: 28-05-2017, 07:13 PM
Use a clear 6-16mm hose cut long enough to go from bottom of fryer over the edge and down to the floor. stand upright and suck on hose watching it fill towards your mouth,within a inch or two of...
Liked On: 28-05-2017, 07:11 PM
Heya, Just wondering if there are any reloaders in the Wellington/Porirua/Kapiti region that I could link up with and do a crash course on reloading..... I'd be keen to go through the process...
Liked On: 28-05-2017, 07:05 PM
300_BLK Hello everyone! Reviving this thread from the dead… Just an update about the ELD-M. Not that i have shot that many animals with it but as per my report (link somewhere in early messages)...
Liked On: 28-05-2017, 07:04 PM
I meet this guy in the forum and after a few messages we meet to say "giday"… LOL. i knew he was a good person and we get along very well so, few days ago knowing the "pain" i am because i can go for...
Liked On: 28-05-2017, 06:59 PM
Hey Greg, just a quick note to let you know how happy I am with the T2. Been crazy with fullbore season, but finally got it installed and took it over to the Wairarapa for a test. To give you an...
Liked On: 25-05-2017, 06:58 PM
Ah, mine is illuminated red. Battery life is okay. The case tends to push the buttons so that's a downside but mine isn't flat yet after a week since charge and regular mucking around. Sent...
Liked On: 25-05-2017, 06:56 PM
Just thought I'd share this little project. I've just purchased (well, about to pay for it) Maca49 Tikka .223 for the youngest. I was thinking of getting a Boyd's, but chopping up a stock that...
Liked On: 24-05-2017, 08:21 PM