Williamfga
Member

26 Likes

Page 2 of 2 First 12

• Jump to page:

1. 
   Williamfga liked post by 199p On thread : Carbon Tikka 6.5 PRC build

   Nah bro need to smash em before the green rain comes in. Sent from my SM-G998B using Tapatalk

   Liked On: 07-10-2023, 01:02 AM

2. 
   Williamfga liked post by Ranger 888 On thread : Winchester M70 XTR FWT .308 Build ALL ADVICE WELCOME!!!!!!

   I have a stock standard Featherweight in .308. Cut 2 inches off the barrel for close in bush work, put a Leupold 4-12 scope on it. I shot a red hind at 425 metres. Every deer I had in my sights went...

   Liked On: 20-09-2023, 10:53 PM

3. 
   Williamfga liked post by Jus On thread : Carbon Tikka 6.5 PRC build

   Just because you see no signs on brass, some brass is hard and some is soft depending on manufacturer, doesn’t mean you are under pressure. There is no free speed. The guys who figure out the max...

   Liked On: 26-08-2023, 09:33 PM

4. 
   Williamfga liked post by Roarless20 On thread : .308 ammunition advice

   Some rifles just don't shoot well. My mate had ruger m77 mk1 243 that a gunsmith rebarrelled into a 308 and bedded the action. He spent years trying to sort a load for it but it was never any good. ...

   Liked On: 26-08-2023, 05:08 PM

5. 
   Williamfga liked post by matto1234 On thread : Carbon Tikka 6.5 PRC build

   I loaded up some 156s for my mates 20inch tikka and got 2860fps with an es of 3

   Liked On: 26-08-2023, 04:23 PM

6. 
   Williamfga liked post by RugerM77 On thread : .308 ammunition advice

   The last three .308's I've worked with recently all shot Sako gameheads at or under MOA. They also shot fed Blue Box and Rem Coreloct at near to MOA. IMO stick to the Gameheads in the short term,...

   Liked On: 26-08-2023, 04:22 PM

7. 
   Williamfga liked post by Jhon On thread : .308 ammunition advice

   FWIW I load 308 for a young mate, 150 SSTs over AR2206H after advice from this forum to emulate Hdy, Factory Superformance with same 150gn SST. He has a 16 in, X-Bolt, Superlight, suppressed. Using...

   Liked On: 26-08-2023, 04:22 PM

8. 
   Williamfga liked post by grandpamac On thread : .308 ammunition advice

   Greetings again, The Sako ammo shooting around MOA suggests that the rifle is capable of decent accuracy and does better with the blunter projectiles which have more bearing surface. I did a load...

   Liked On: 26-08-2023, 04:20 PM

9. 
   Williamfga liked post by The bomb On thread : .308 ammunition advice

   Federal blue box always went well for me before I got the reloading bug,150g ,killed well and around Moa in all the 308s I have had over the years,model 7 ,midland,charter arms and now sako A7.

   Liked On: 26-08-2023, 04:20 PM

10. 
    Williamfga liked post by feratox On thread : .308 ammunition advice

    Have you tried without suppressor or with different muzzle device

    Liked On: 26-08-2023, 02:20 PM

11. 
    Williamfga liked post by 25/08 IMP On thread : Carbon Tikka 6.5 PRC build

    Nice set up but you need to reload to get any advantage of having a PRC as those speeds are super slow. SD of my reloads are usually between 3 -9 Sent from my CPH2145 using Tapatalk

    Liked On: 25-08-2023, 06:59 PM

Page 2 of 2 First 12

• Jump to page: