winaa
Member

336 Likes

Page 10 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page:

1. 
   winaa liked post by Ruger7mm On thread : 284 Winchester with RL 26

   Hi hopefully this works, it is the work RICHARD FRAILEY did on 284 load development. Very interesting and detailed, good info on primers and powder position, temperature impact etc. Cheers 7mm...

   Liked On: 22-05-2020, 10:59 AM

2. 
   winaa liked post by joelhenton On thread : Kimber 16in 7mm08 loads

   winaa and Rated M for Magnum I'm still to chrono this load, will do shortly, I'll post up here with results. I believe it's on the warm side. I got up to 43gr CFE223 with no obvious signs of over...

   Liked On: 21-05-2020, 10:28 PM

3. 
   winaa liked post by joelhenton On thread : Kimber 16in 7mm08 loads

   Running 42gr CFE223 behind 162gr ELD-M in my Kimber 7mm-08 with 16" barrel.

   Liked On: 20-05-2020, 10:54 AM

4. 
   winaa liked post by Philipo On thread : Kimber 16in 7mm08 loads

   I had a Kimber Montanta in 7-08 cut it down to 13", I like to run heavy pills ( instead of light ones in short barrels, as people try to keep speed ) I go heavy for retained energy & to get the most...

   Liked On: 20-05-2020, 10:54 AM

5. 
   winaa liked post by jwightman On thread : Same load increased velocity 🤔

   Problem solved. I thought I gave my rifles a really good clean, but apparently not. Brought a can of foaming cleaner after cleaning, finally back down to 2704 fps

   Liked On: 16-05-2020, 10:50 PM

6. 
   winaa liked post by norsk On thread : Optic Usage Poll take 1.

   Meopta Swarovski S&B Honestly I won't be buying another top brand scope.O have been blown away by the quality of Meopta.

   Liked On: 16-05-2020, 10:41 PM

7. 
   winaa liked post by faregame On thread : LH Chassis/stock for Tikka

   GRS make left hand Bifrosts

   Liked On: 15-05-2020, 07:57 PM

8. 
   winaa liked post by 223nut On thread : LH Chassis/stock for Tikka

   Nope, they sell them left handed

   Liked On: 15-05-2020, 05:01 PM

9. 
   winaa liked post by blair993 On thread : LH Chassis/stock for Tikka

   I have an mdt HS3 that I modded for a lh tikka. We sell mdt chassis in New Zealand. I have a MDT ACC chassis arriving thats getting changed to LH. The Oryx has poly panels or the new MDT xrs

   Liked On: 15-05-2020, 05:01 PM

10. 
    winaa liked post by Norway On thread : Ballistic Calibration/ Applied Ballistics

    For those of you that use the program, here's a short how-to improve precision. https://youtu.be/yCOzfQG1ZsQ

    Liked On: 15-05-2020, 11:03 AM

11. 
    winaa liked post by Edunn On thread : Barrel length vs speed

    Keep in mind the reduction in velocity does not mean you'll kill fewer animals. I got my 7mm08 cut to 16" and it's a great rifle with plenty of killing power for short - medium distance (300yd or...

    Liked On: 15-05-2020, 09:53 AM

12. 
    winaa liked post by Rock river arms hunter On thread : Tmks

    139758 There ya go just for you. That's the entry side with a 3.5inch Peasent knife for scale

    Liked On: 15-05-2020, 09:48 AM

13. 
    winaa liked post by Rock river arms hunter On thread : Tmks

    Hi folks. I know some are weighing up and asking about the TMKS. Well I've used the 7mm 160gr version and it works. Today I used the 168gr 308 version. 240y ish shot. Quartering away...

    Liked On: 15-05-2020, 09:47 AM

14. 
    winaa liked post by Matt-P.Nth On thread : Tmks

    I’ll chuck up my experiences with them too if ya don’t mind me adding to ya thread. I’ve shot 5 deer with the 195 TMK out of my 308 doing 2520. Animal 1/2 Fallow at 190 and 240 yards, 2 shots,...

    Liked On: 15-05-2020, 09:47 AM

15. 
    winaa liked post by blair993 On thread : Suppressor cover for ODL 7.62 QD suppressor

    139615

    Liked On: 13-05-2020, 03:36 PM

Page 10 of 23 First 1234567891011121314151617181920212223 Last

• Jump to page: